3M™ Cold Shrink Cable Breakout Boots 8560 Series

Part Number 8565, 3M ID 7000149332, UPC 00054007431473

1 of 1

Hover to zoom

Ensures excellent insulation and void-free sealing of cable breakouts
High dry- and wet-insulation resistance
Creates an environmental enclosure for individual cable phases
Has an outer jacket diameter range of 1.3 to 1.94 inches

View all details

For industrial/occupational use only. Not for consumer sale or use.

Specifications

Attribute Name	Value
Brand	Scotchlok™
Breakout Boot	Yes
Cable Accessory Products	Cable Breakout Boot Kits
Cable Outside Diameter Range	2.60-4.70 inch
Cable Shield Diameter Range	1.09-1.94 in, 1.09-1.94 in
Inner Diameter After Shrink (Imperial)	1.09 in
Inner Diameter After Shrink (Metric)	27.7 mm
Inner Diameter Before Shrink (Imperial)	1.94 in
Inner Diameter Before Shrink (Metric)	49.3 mm
Insulation Rejacketing	No
Jacket Outside Diameter Range	2.60 - 4.70 in
Jacket Outside Diameter Range (Metric)	66.0 - 119.4 mm
Metallic Shield Diameter Range	1.09 - 1.94 in
Model	Cold-shrink
Outer Diameter After Shrink (Imperial)	2.6 in
Outer Diameter After Shrink (Metric)	66 mm
Outer Diameter Before Shrink (Imperial)	4.7 in
Outer Diameter Before Shrink (Metric)	119.4 mm
PlantAnalystID	ABBA-Z1GUQ
Product Type	Cable & Wire Accessory
RoHS 2011/65/EU Compliant	Undetermined
RoHS EU Comments	Contact 3M for information
Shrink Type	Cold Shrink
TDS Required	Yes
Transition Type	1 - 3 Breakout
Units per Case	1

Details

Ensures excellent insulation and void-free sealing of cable breakouts
High dry- and wet-insulation resistance
Creates an environmental enclosure for individual cable phases
Has an outer jacket diameter range of 1.3 to 1.94 inches
3-way outlet
Dark gray silicone rubber construction
Withstands temperatures of 221 °F (105 °C)
RoHS 2011/65/EU Compliant

3M™ 8560 3 Way Cold Shrink Cable Breakout Boot is made of a dark gray silicone rubber and protects the phase leg breakout of 3 way medium voltage power cables. It shields power cables from moisture, contamination, corrosion, ozone, UV radiation, physical contact and other hazards in associated environments. It allows quick installation while accommodating a wide range of cables.

3M™ 8560 3 Way Cold Shrink Cable Breakout Boot features an open end and is factory expanded and mounted on a removable plastic core. When the supporting cores inside the boot are removed, this pre stretched boot shrinks to the pre determined diameter, creating an environmental enclosure for individual cable phase legs and the overall cable jacket. It can be used in conjunction with cold shrink silicone rubber termination assemblies and RJS Series rejacketing sleeves for shielded power cable terminating applications. It's compatible with cold shrink silicone rubber termination products and RJS Series phase rejacketing sleeves. RoHS 2011/65/EU Compliant.

Resources

Bulletins

Cold Shrink - Silicone Rubber (PDF, 109.9KB)

Catalogs

3M™ Cable Accessory Products, 2013 Electrical Products Catalog (PDF, 5.3MB)

Data Sheets

8560 Series CS Cable Breakout Boots (PDF, 69.7KB)

Product Selection Guides

3M™ Cold Shrink Silicone Rubber 8560 Series (PDF, 5.1KB)

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.