3M™ Cold Shrink Corrosion Protection Kits CPT Series
- | Select product options for IDs.
Details
Highlights
- Designed to provide protection for bulkhead termination connectors
- Offers protection from wet and salt-fog installation environments
- Ideal for use in standard and hazardous locations
- Insulator is formulated with EPDM rubber which contains no chlorides or sulfur
- Provides tight sealing between NPT fitting threads and the enclosure using mastic strips
- Includes an insulator assembly, mastic seal strip pack and instruction sheet
3M™ Cold Shrink Corrosion Protection Kit CPT Series are designed to provide a quick and easy method for protecting bulkhead termination connectors from the corrosive influences of wet and salt-fog installation environments. A CPT series assembly is an open-ended tubular rubber sleeve which is factory expanded and assembled onto a removable core. The core is removed after the assembly has been positioned for installation over a bulkhead terminator connector. Mastic strips are provided for sealing between NPT fitting threads and the enclosure in use (junction box, cabinet, panel board, etc.). CPT insulating sleeves are made of an EPDM rubber that contains no chlorides or sulfers.
Typical properties
Resources
Similar products
| Minimum Cable Diameter (Metric) | 16.8 mm, 66 mm, 73.7 mm, 35.6 mm, 50 mm, 42.7 mm, 12.7 mm, 31 mm | ||
| Minimum Cable Diameter (Imperial) | 0.66 in, 2.6 in, 2.902 in, 2.9 in, 1.402 in, 1.97 in, 1.68 in, 0.5 in, 1.22 in | ||
| Maximum Cable Diameter (Imperial) | 1.902 in, 2.2 in, 5.4 in, 6 in, 3 in, 4.3 in, 3.6 in, 1.598 in, 2.65 in | ||
| Maximum Cable Diameter (Metric) | 48.3 mm, 55.9 mm, 137.2 mm, 152.4 mm, 76.2 mm, 109.2 mm, 91.4 mm, 40.6 mm, 67.3 mm | ||
| Material | EPDM Rubber |
3M™ Cold Shrink Corrosion Protection Kits CPT Series
3M™ CXS Series Cold Shrink Coax Sealing Kits
3M™ PS Cold Shrink Insertion SealsLegal disclaimer
Manufacturing Origin: USA
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
