1. All 3M Products
  • 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1120H
  • 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1120H

    3M ID 70002019969
    • Tan flexo plate mounting tape has air release feature with high plate side adhesion
    • 0.51 mm thickness
    • Soft/Process
    • Consistent caliper control allows the printer to use multiple foam densities on a print job to optimise print quality
     More...
    Specifications
    Adhesive Type
    Differential Acrylate
    Air Release
    Yes
    Backing Material
    Polyethylene Foam
    Backing Thickness (metric)
    0.559 mm
    Composite Sleeves
    No
    Industries
    Print
    NPVI Mktg
    No
    Overall Length (Metric)
    22.86 m
    Overall Width (Metric)
    457 mm
    Primary Liner
    Polycoated Polyester
    Primary Liner Color
    Clear
    Print Quality
    Process Printing
    Print Quality (Series)
    11 Series
    Product Form
    Roll
    Total Tape Thickness without Liner (metric)
    0.56 mm
    Urethane Sleeves
    Yes
    Product Details
    • Tan flexo plate mounting tape has air release feature with high plate side adhesion
    • 0.51 mm thickness
    • Soft/Process
    • Consistent caliper control allows the printer to use multiple foam densities on a print job to optimise print quality
    • Has higher plate side adhesion for challenging print conditions that use thick plates or small print sleeves
    • Print plates mounted on E1120H will have no air bubbles under the plate due to the air release feature designed into the tape
    • Grooves in the adhesive are created by a cross-hatch pattern from the release liner
    • Plate demounts from the double coated cushioned tape without adhesive residue
    • Tape also removes cleanly from the sleeve or steel print cylinder
    • Flexographic printing, flexographic printers
    • Cushioned flexographic plate mounting sticky back foam tape

    Mount your photopolymer plate to print cylinders with 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1120H. Our 0.51 mm tan, double coated foam tape has the air release feature with high plate side adhesion. It is used for high quality process printing.

    3M™ Cushion-Mount™ Plus Plate Mounting Tape E1120H with easy mount adhesive and higher plate side adhesive is designed for mounting flexographic print plates to cylinders or sleeves. It provides high quality tone reproduction where process printing is important. Our Easy Mount liner creates micro-channels in both adhesive surfaces. The crosshatched pattern creates a continuous and permanent network of micro-channels in the adhesive, allowing air to escape from between the tape and cylinder/sleeve and between the tape and plate. The adhesive on the linered side (plate side) of the tape is designed for mounting photopolymer plates, has excellent holding power on-press and clean plate removal when demounting. The adhesive on the non-linered side (cylinder side) of the tape is designed for mounting to flexographic printing cylinders or sleeves, providing easy application at mounting and clean removability when demounting.