Introducing 3M™ Cavity Wax Plus

REQUEST A DEMO

3M™ Cavity Wax Overview

How do you prevent corrosion?

3M™ Cavity Wax Plus 08852 is an interior-corrosion prevention coating for application to automotive bare or primed metals. Typically applied to door skins, rocker panels, interior quarter panels, frame rails, etc. Designed to remain soft and pliable it will not crack, chip, or peel.

When used according to directions and with the 3M™ Cavity Wax Plus wand kit, 3M™ Cavity Wax Plus delivers the right amount of flow and wicking, providing consistent and uniform protection for your repair. It also eliminates the need for using antiquated and messy bulk spray technology to apply corrosion protection to a vehicle.

3M™ Cavity Wax Plus Applicator Wand Kit provides three options, 8-inch, 24-inch and 34-inch to access hard-to-reach places:
 

  • 24" and 34" wands provide a uniform 360 degree spray pattern to ensure that you are maximizing coverage with each application.
  • 8" tube delivers a powerful stream of material to flood joints and seal them from corrosive elements.
  • Provides access to inner body structures with tight tolerances.
  • Industry organizations and OEMs alike specify the use of cavity wax to prevent corrosion.

3M™ Cavity Wax Plus Featured Products


Test Results: Salt Spray

  • Test results without protection
    Without protection

    Actual panel test results using the ASTM B117 standard for 1,500 hours.

  • With 3 coats of 3M™ Cavity Wax Plus
    With 3 coats of 3M™ Cavity Wax Plus

    Actual panel test results using the ASTM B117 standard for 1,500 hours.


Follow Us
The brands listed above are trademarks of 3M.