1. All 3M Products
  • 3M™ Hot Melt Adhesive 3762LMQ, Beige, 16 mm x 200 mm, 5 kg
  • 3M™ Hot Melt Adhesive 3762LMQ, Beige, 16 mm x 200 mm, 5 kg

    3M ID 62372091322
    • Low temperature applied packaging adhesive.
    • Excellent hot tack.
    • 100 percent solids
    • Woodworking, furniture, automotive, transportation, aerospace, general industrial, upholstery, point of purchase display, sample boards, military, window, door, building, trophies, novelties, audio components, cabinets, construction, packaging, electronic
     More...
    Specifications
    Attribute Name
    Value
    Adhesive Type
    Ethylene Vinyl Acetate
    Application Method
    Handheld Process, Spray
    Consumer Label
    No
    Heat Resistance
    130 Degree Fahrenheit
    Industries
    Automotive, Construction, Consumer Goods, Electronics, Furniture, General Industrial, Military and Government, Packaging, Retail, Signage, Specialty Vehicle, Transportation, Woodworking
    Open Time
    35 Second
    Overall Length (Metric)
    0,2 m
    Overall Width (Metric)
    15,9 mm
    Product Form
    Pound
    Product Key
    3762 LM Q
    Shear Strength at 72 Degrees F (22 Degrees C)
    390 Pound_Per_Square_Inch
    Solids Weight Percent (Approximate)
    100 Percent
    Substrate 1
    Paper & Cardboard
    Substrate 2
    Paper & Cardboard
    Temperature Setting for EC Heat Gun
    1
    Product Details
    • Low temperature applied packaging adhesive.
    • Excellent hot tack.
    • 100 percent solids
    • Woodworking, furniture, automotive, transportation, aerospace, general industrial, upholstery, point of purchase display, sample boards, military, window, door, building, trophies, novelties, audio components, cabinets, construction, packaging, electronic
    • Assembly, assembling joining, attaching, securing, repairing, potting, panel bonding, wire tacking, bundling, sealing, encapsulating, rigidizing, foam bonding, gluing, packaging, adhering, and closing.

    3MTM Scotch-WeldTM Hot Melt Adhesives are advanced adhesives to help you improve productivity, lower cost, and minimize waste. Adhesives are 100% solids thermoplastic resins that become fluid when heated and quickly wet the bonding surface.

    Keep Production Flowing 3M™ Hot Melt Adhesive 3762 is formulated to grab and seal quickly to meet the demands of high-volume production settings such as packing, woodworking and assembly. These features increase the speed of carton closures and provide adhesion to wood, paperboard, corrugated and other fibrous substrates. It provides strong shear strength and low peel strength, which means your packages stay sealed and components stay bonded under most conditions. Economical and Safe A 30 second open time, along a 1/8" bead, is sufficient for positioning and adjusting for fit and supports high-tempo productivity for packaging, woodworking, and applications that involve fibrous materials. We manufacture this product using 100% solids, thermoplastic resin for use with our 3M™ Hot Melt Applicators. As a low-volatile-organic (VOC) compound, this adhesive produces minimal odor when heated and helps support a comfortable work environment. Recommended Applications General packaging Recouperage Repacking chipboard Point-of-Purchase Beadboard Displays Woodworking Trade exhibits Foam inserts Craft applications Bonding waxed surfaces The Hot Melt Advantage Hot-melt adhesive applicators, commonly called “glue guns” are tools used to apply liquefied thermoplastic adhesives and are available in low and high-temperature versions. Low-temperature adhesive applicators operate at approximately 250ºF/ 121ºC and are beneficial when bonding heat sensitive materials such as electronics, plastics, and cloth. High-temperature applicators operate at a minimal temperature of approximately 380ºF/ 193ºC. The applicator creates a flow of adhesive when a solidified adhesive stick is fed into the heat chamber, where it is melted using a fixed-temperature heating element. The molten adhesive is then extruded through a nozzle by either pneumatic pressure, a mechanical trigger mechanism, or with pressure applied directly on the stick. Nozzles can be changed to dispense adhesive in a manner that meets various requirements; from a thin, wide strip for carton sealing, to a narrow, thicker bead for bonding wood, composites, or metal. Nozzles are typically metal and become extremely hot during use, which can quickly burn skin. Once dispensed from the applicator, the adhesive generally sets quickly, in most cases just a few seconds. Hot-melt applicators are widely used in industry, crafts, home, and work with materials ranging from paper and lace to wood and some metals.