| BACK TO START | BACK ONE STAGE | ||||||||
| 33kV Single Core Polymeric Copper Wire Screened to Three Core PILC Cold Shrink Joint | |||||||||
| Supplied with Mould for Resin Encapsulation, requires 20 Litres of Resin | |||||||||
| Kit Ref | Application Range Guide CSA (mm2) | Diameter over Primary Insulation (mm) | Connector Dimensions | Earthing system | Splice Body | Outer Protection | Mechanical Connector Included | ||
| Diameter (mm) | Length (mm) | ||||||||
| 94-FP435-3/C | 120 - 240 | 28.4 - 42.0 | 23.3 -42.0 | 170 | CFS/Stocking | QS2000 | Mould & Resin | 332-614-010 | |
| 94-FP436-3/C | 185 - 400 | 28.4 - 42.0 | 23.3 -42.0 | 170 | CFS/Stocking | QS2000 | Mould & Resin | 332-617-010 | |
| CLICK TO VIEW → | Installation Instruction | Type Test Report | Technical Data Sheet | ||||||
| When joining smaller cables, or those of dissimilar sizes, a build up kit may be required; | click to select | ||||||||
| For HSL Type PILC Cables, an additional supplementary kit is needed; | 94-FV635-3-HSL | ||||||||