3M™ Dynamar™ Polymer Processing Additive FX 5911, 25 kg, Case
- Reduces or eliminates die build-up
- Excellent thermal stability for high temperature processing
- Ideal for use in high viscosity, high molecular weight polyolefins
- Lowers apparent melt viscosity
3M™ Dynamar™ Polymer Processing Additive FX 5911
Dynamar FX 5911 improves extrusion processing of polyolefins and other thermoplastic resins, and can offer performance and cost benefits in a wide range of polymers. It is particularly useful at low levels in reducing extruder die build-up. Dynamar FX 5911 lowers apparent melt viscosity and permits fabricators to use high viscosity, high molecular weight resins in many film, pipe and blow molding processes which otherwise could not be processed on available equipment. Now with the aid of FX 5911, fabricators can produce blow molded bottles, pipes and other HMW-HDPE articles with improved surface finish and quality. As a polymer processing additive (PPA), Dynamar FX 5911 reduces or eliminates melt fracture and can reduce extruder torque. Through optimization of the extrusion process, the use of Dynamar FX 5911 may also allow for an increase in output during extrusion. Dynamar FX 5911 is effective at low use levels in reducing die build-up in many polymers including LLDPE, LDPE, HDPE, PP and other thermoplastic resins. This allows for longer defect-free run times and improved gauge uniformity in cast film (see Figures 1 and 2) and BOPP processes as well as reduced fiber breakage in monofilament and fiber processes.
- Reduces or eliminates die build-up
- Excellent thermal stability for high temperature processing
- Ideal for use in high viscosity, high molecular weight polyolefins
- Lowers apparent melt viscosity
- Speeds colorant change
- For use at very low levels
- Free-flowing fluoropolymer processing aid
- Can offer performance and cost advantages
- X 5911 lowers apparent melt viscosity and permits fabricators to use high viscosity, high molecular weight resins in many cast and blown film, and blow molding applications which otherwise could not be processed on available equipment. Now with the aid of FX 5911, fabricators can produce blow molded bottles, pipes and other HMW HDPE articles with excellent gloss values and improved quality
|
Attribute Name
|
Value
|
|---|---|
|
Bulk Density
|
1.08 g/cm³
|
|
Capabilities
|
Color Changeover Improvement
|
|
Container Type
|
Bag in Box
|
|
Industries
|
Construction, General Manufacturing, Packaging, Rubber and Plastic
|
|
Melt Flow Index (MFI)
|
5-14 g/10 min.
|
|
Melting point
|
110 - 126 º C (230 - 258.8 º)
|
|
Net Weight (Metric)
|
25 kg
|
|
Processing Concern
|
Color Changeover, Color Hangup, Die Build-up Reduction, Flow Instability, Limited Throughput, Pressure Reduction, Profile Stability, Surface Roughness
|
|
Product Form
|
Free Flowing Granular, Granular
|
|
Shelf Life
|
2 Year
|
|
Weight (Metric)
|
25 Kilogram
|
Pošljite nam sporočilo
Zahvaljujemo se vam za zanimanje za 3M. Da bomo na vaše vprašanje odgovorili v najkrajšem možnem času, vas vljudno prosimo, da navedete nekaj ključnih informacij, vključno z vašimi kontaktnimi podatki. Na osnovi posredovanih podatkov, bo na vaše vprašanje odgovoril po e-pošti ali telefonu predstavnik podjetja ali eden od naših pooblaščenih poslovnih partnerjev, s katerimi bomo morda delili vaše osebne podatke v skladu s politiko zasebnosti 3M.
Zahvaljujemo se vam, da ste se obrnili na podjetje 3M
Prejeli smo vaše sporočilo in zdaj obravnavamo vašo poizvedbo
Naš predstavnik vas bo kontaktiral po telefonu ali e-pošti.
An error occurred.
