1. All 3M Products
  • 3M™ Scotch-Weld™ Structural Plastic Adhesive DP8005 Black, 35 mL, 12 per case
  • 3M™ Scotch-Weld™ Structural Plastic Adhesive DP8005 Black, 35 mL, 12 per case

    3M ID 62277904371
    • 3 minute work life
    • Structurally bonds polyolefins without surface treatment
    • Medium viscosity
    • Medium viscosity allows controlled dispensing
     More...
    Specifications
    Attribute Name
    Value
    Adhesive Type
    Acrylic
    Brand
    Scotch-Weld™
    Consumer Label
    No
    Design Challenges
    Noise Vibration & Harshness Control NVH
    Full Cure
    8-24 Hours @ 72 F (22 C)
    Hardness
    55-60 Shore D
    Indoor/Outdoor
    Both
    Industries
    Automotive, Construction, Consumer Goods, Electronics, General Industrial, Metalworking, Military and Government, Signage, Specialty Vehicle, Transportation, Woodworking
    Maximum Operating Temperature (Celsius)
    66 Degree Celsius
    Mix Ratio Volume Base:Accelerator
    10 : 1
    Open Time
    3 minutes @ 72 F (22 C)
    Physical Form
    Flowable Liquid
    Position
    Best
    Product Form
    Cartridge
    Product Type
    Structural Plastic Adhesive
    Shear Strength at 72 Degrees F (22 Degrees C)
    2400 Pound_Per_Square_Inch
    Shelf Life in Months (from date of manufacture)
    6
    Specific Gravity
    0.99
    Storage Temperature
    40 Degree Fahrenheit
    Substrate 1
    Glass & Ceramics, Metal, Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Plastics (Polyolefins and Thermoplastic Elastomers), Wood & Hardboard
    Substrate 2
    Glass & Ceramics, Metal, Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Plastics (Polyolefins and Thermoplastic Elastomers), Wood & Hardboard
    Units per Case
    12
    Viscosity Range (cps) at Room Temperature
    25,000
    Details
    • 3 minute work life
    • Structurally bonds polyolefins without surface treatment
    • Medium viscosity
    • Medium viscosity allows controlled dispensing
    • Solvent-free adhesive system
    • Strong adhesive can replace screws, rivets and welding

    3M™ Scotch-Weld™ Structural Plastic Adhesive 8005 is a two-part acrylic based adhesive. 10:1 mix ratio, 3 minute work life and handing strength in approximately 3 hours.

    3M™ Scotch-Weld™ Structural Plastic Adhesive 8005 can bond many low surface energy plastics, including many grades of Polypropylene, Polyethylene, and Thermoplastic Elastomers (TPE`s) without special surface preparation.