1. Slovenija
  2. All 3M Products
  3. Filtration & Separation
  4. Filter Cartridges & Media
  5. Pleated Membrane Cartridges
  6. 3M™ 740 Series Filter Cartridge, 740B40PP015D1, 40 in, 15 μ, 1/Case

3M™ 740 Series Filter Cartridge, 740B40PP015D1, 40 in, 15 μ, 1/Case

3M ID 70020310564
  • Higher flow capacity per cartridge resulting in fewer cartridges required, reduced cartridge handling, and less individual cartridge seal points reducing chance of fluid bypass
  • 3M Microfiber Filtration Media offers high particle reduction efficiency throughout the service life of the filter
  • No special tools or hardware required for filter change-out
 More...
View all details
Specifications
Attribute Name
Value
Brand
3M™
Filter Type
Depth
Gasket/O-ring Material
Nitrile
Industries
Industrial
Maximum Operating Temperature (Celsius)
70 Degree Celsius
Micron Rating
15 μm
Product Series
740
Product Type
Cartridge
Series
3M™ 740 Series
Units per Case
1
Product Details
  • Higher flow capacity per cartridge resulting in fewer cartridges required, reduced cartridge handling, and less individual cartridge seal points reducing chance of fluid bypass
  • 3M Microfiber Filtration Media offers high particle reduction efficiency throughout the service life of the filter
  • No special tools or hardware required for filter change-out

Our 3M™ 740 Series filter cartridges are high efficiency, outside to inside flow direction liquid filtration cartridges designed for applications with high contaminant removal requirements.

Our 740 series cartridges are used in filter housings that accept 6.5 inch/165 mm outside diameter, 40 inch/1016 mm length filter cartridges with 226 o-ring connections. Polypropylene microfiber forms the basis of the filtration media we use in the 740 series filter cartridges. Our manufacturing processes allow for tightly controlled specifications resulting in a filter media with consistent and predictable particle retention characteristics. We offer 740 series cartridges in micron ratings ranging from 1 to 70 microns (@ 99.9% Particle Removal Efficiency). Polypropylene provides broad chemical compatibility for use in a variety of applications.

We produce 740 series cartridges in two configurations – “B” and “K.” The “B” versions contain the maximum amount of filter media surface area for those applications where high contaminant holding capacity is needed. The “K” versions contain an optimized amount of filter media surface area (60% - 70% of ‘B” versions) for those applications that benefit from a low unit cost filter design. In “B” and “K” versions, the microfiber media is pleated in a compound radial design that optimizes the usable surface area of the filter cartridges. The 740 series cartridges also incorporate polypropylene end caps, outer sleeves and cores to protect the pleat structure and provide durability. A double o-ring seal helps reduce the risk of fluid bypass.

Applications

  • Process Waters (pre-RO, Cooling)
  • Machine Coolants
  • Chemicals
  • Refining (Amine, Final Product)
  • Groundwater, Reclaimed Water, Waste Waters
  • Well Injection & Produced Waters