- Easy application and processing - dries in seconds without the need for thermal post-curing
- May require little or no masking
- Allows solder-through repairability and is easily removed for rework & repair
- Contains no volatile organic compounds (VOCs) and has low global warming potential
3M™ Novec™ 1700 Electronic Grade Coating is designed for moisture and corrosion protection of printed circuit boards and electronic components. It is a clear, low viscosity, low surface tension solution of a 2 wt% fluorochemical acrylic polymer carried in a hydrofluoroether solvent. The coating dries to a thin, transparent, film with excellent hydrophobic and oleophobic properties. It repels oils, water, silicones and photoresist solutions. The coating is easy to apply (dip, spray or syringe dispensing), air-dries in seconds, requires little or no masking and is removable and repairable.
3M™ Novec™ 1700 Electronic Grade Coating is designed for moisture and corrosion protection of printed circuit boards and electronic components. It is a clear, low viscosity, low surface tension solution of a 2 wt% fluorochemical acrylic polymer carried in a hydrofluoroether solvent. The coating dries to a thin, transparent, film with excellent hydrophobic and oleophobic properties. It repels oils, water, silicones and photoresist solutions. The coating is easy to apply (dip, spray or syringe dispensing), air-dries in seconds, requires little or no masking and is removable and repairable.
- Easy application and processing - dries in seconds without the need for thermal post-curing
- May require little or no masking
- Allows solder-through repairability and is easily removed for rework & repair
- Contains no volatile organic compounds (VOCs) and has low global warming potential
- Is thermally and electrically stable with excellent dielectric properties
- Provides excellent repellency, anti-wetting and anti-sticking properties against liquids, water, hydrocarbons, silicones, and photoresists
Suggested Applications
- Electronic Coatings
- Anti-Stiction
- Chemical Protection
- Corrosion Protection
- Moisture Protection
|
Attribute Name
|
Value
|
|---|---|
|
Application Method
|
Solution applied by dip, brush, spray or syringe dispense
|
|
Applications
|
Anti-Stiction, Chemical Protection, Corrosion protection, Moisture Protection
|
|
Available Container Sizes
|
12 lb (5.4 kg) 1 Gal Container
|
|
Coating Location
|
Electronic Device Components
|
|
Coating Thickness (Dip Coated)
|
0.1 - 0.2 µm (depending on application method)
|
|
Coverage Area
|
Depends on the application
|
|
Dielectric Constant
|
3.2 (@1kHz, 30%RH)
|
|
Dielectric Strength (V/mil)
|
2000 V/mil
|
|
Dissipation Factor
|
0.002 (@1kHz, 30% RH)
|
|
Dry Time
|
<2 Minutes
|
|
Net Weight (Metric)
|
5,4 kg
|
|
Polymer Type
|
Fluoroacrylate
|
|
Product Form
|
Liquid
|
|
Product Series
|
Novec 1700
|
|
Product Type
|
Protecting
|
|
Product Use
|
Printed Circuit Boards (PCB)
|
|
Removability
|
Removable with 3M™ Novec™ Engineered Fluid 72DA, 3M™ Novec™ Engineered Fluid 73DE or 3M™ Novec™ Engineered Fluid 7100
|
|
RoHS 2011/65/EU Compliant
|
Yes
|
|
RoHS EU Comments
|
Yes (including Directive (EU) 2015/863)
|
|
Solids Level
|
2 %
|
|
Storage Temperature
|
16 °C - 27 °C
|
|
Thermal Cure Time and Temperature
|
No need to cure, dries at room temperature
|
|
UV Detectable
|
No
|
|
Volume (Metric)
|
3,78 L
|
