1. Slovenija
  2. All 3M Products
  • 3M™ Scotch-Weld™ Urethane Adhesive DP620NS Black, 50 mL, 12 per case
  • 3M™ Scotch-Weld™ Urethane Adhesive DP620NS Black, 50 mL, 12 per case

    3M ID 62264550302
    • Versatile polyurethane adhesive has excellent impact resistance and easily adheres to a variety of substrates
    • Low dispense viscosity; yet non-sagging after dispensing so adhesive stays where placed
    • Low temperature flexibility and low shrinkage
    • Long open time provides ample opportunity to position and adjust work
     More...
    View all details
    Specifications
    Attribute Name
    Value
    Adhesive Type
    Urethane
    Applications
    Composite Bonding, Impact resistant, Metal to Composite Bonding, Structural Bonding, Vibration resistant
    Application Temperature From (Celsius)
    −55 Degree Celsius
    Application Temperature To (Celsius)
    120 Degree Celsius
    Consumer Label
    No
    Design Challenges
    Impact & Shock Absorption, Noise Vibration & Harshness Control NVH
    Full Cure
    48 Hours @ 72 F (22 C)
    Hardness
    50 Shore D
    Indoor/Outdoor
    Both
    Industries
    Construction, General Industrial, Metalworking, MRO, Signage, Specialty Vehicle, Woodworking
    Open Time
    20 Minute
    Physical Form
    Paste
    Position
    Better
    Product Form
    Cartridge
    Product Type
    Urethane Adhesive
    Shear Strength at 72 Degrees F (22 Degrees C)
    2500 Pound_Per_Square_Inch
    Shelf Life in Months (from date of manufacture)
    12
    Specific Gravity
    1.13
    Storage Temperature
    60-80 F (16-27 C)
    Substrate 1
    EPDM Rubber, Glass & Ceramics, Metal, Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Rubber (Except EPDM), Wood & Hardboard
    Substrate 2
    EPDM Rubber, Glass & Ceramics, Metal, Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Rubber (Except EPDM), Wood & Hardboard
    Viscosity Range (cps) at Room Temperature
    Paste
    Volume (Metric)
    50 mL
    Product Details
    • Versatile polyurethane adhesive has excellent impact resistance and easily adheres to a variety of substrates
    • Low dispense viscosity; yet non-sagging after dispensing so adhesive stays where placed
    • Low temperature flexibility and low shrinkage
    • Long open time provides ample opportunity to position and adjust work

    3M™ Scotch-Weld™ Urethane Adhesive 620 is a flexible, two-part polyurethane based structural adhesive that performs well in numerous applications where some flexibility is needed. It effectively bonds to many substrates such as composites, metals, wood, and many plastics and rubbers, ceramics and glass (may require primer for durability).

    3M™ Scotch-Weld™ Urethane Adhesive 620 is a rapid-setting, two-part, polyurethane adhesive with low temperature flexibility and low shrinkage. These features make this urethane adhesive an ideal choice for bonding dissimilar substrates together, and in exterior applications, particularly in the general industrial, transportation, maintenance and repair, and construction industries. With an easy mixing, non-sag formula you can be assured our adhesive will remain where you place it even when used on vertical surfaces. It is available in bulk or smaller Duo-Pak forms. Two Parts, One Common Bond The mix ratio is 1:1 for quick, precise dispensing, and with a 20-minute working time there's ample opportunity for repositioning to keep projects on track. The adhesive reaches handling strength in approximately four hours and is fully cured in 48 hours (at 72°F/22°C). Unlike one-part polyurethanes, this material has no depth of cure problems and cures throughout relatively quickly. Why Choose Urethane? Urethane adhesives are two-part adhesives that are relatively flexible when cured, have excellent impact resistance and good adhesion to most plastics. They also bond well to woods, concrete and rubbers, but have reduced resistance to solvents and high temperatures. Uncured adhesive components are sensitive to moisture. Structurally Strong Polyurethane adhesives are part of the class of adhesives called "structural adhesives," which also includes acrylic, cyanoacrylate, and others. Polyurethanes begin as reactive liquid polymers that undergo a chemical reaction when mixed, and then cure to form a solid plastic material. Once the two parts are mixed in their specified ratio, they begin the curing process and offer a limited working time where the adhesive can be applied and the two surfaces positioned as need. This "work life" lasts anywhere from a few minutes to a few hours. This class of structural adhesives provides high shear and peel strengths, depending on the formula and better heat and chemical resistance than other common adhesives.