- Pink, flexo plate mounting tape with air release feature adhesive
- This 0.015 inch (0.38 mm) pink, double coated foam tape has the air release feature adhesive with easy plate side removal.
- Provides high quality light-medium combination print. The adhesives remove cleanly from the print plate and the print cylinder.
- Consistent caliper control allows the printer to use multiple foam densities on a print job to optimise print quality
|
Attribute Name
|
Value
|
|---|---|
|
Adhesive Type
|
Differential Acrylate
|
|
Air Release
|
Yes
|
|
Applications
|
Flexographic Plate Mounting
|
|
Backing Material
|
Polyethylene Foam
|
|
Backing Thickness (metric)
|
0,432 Millimetre
|
|
Composite Sleeves
|
No
|
|
Overall Length (Metric)
|
23 m
|
|
Overall Width (Metric)
|
1372 mm
|
|
Primary Liner
|
Polycoated Polyester
|
|
Print Quality
|
Combination Printing - Light Medium
|
|
Print Quality (Series)
|
19 Series
|
|
Product Colour
|
Pink
|
|
Total Tape Thickness without Liner (metric)
|
0,43 Millimetre
|
|
Urethane Sleeves
|
Yes
|
- Pink, flexo plate mounting tape with air release feature adhesive
- This 0.015 inch (0.38 mm) pink, double coated foam tape has the air release feature adhesive with easy plate side removal.
- Provides high quality light-medium combination print. The adhesives remove cleanly from the print plate and the print cylinder.
- Consistent caliper control allows the printer to use multiple foam densities on a print job to optimise print quality
- Easy Mount liner, has micro-channels in both adhesive surfaces. The crosshatched pattern allows air to escape from between the tape and cylinder/sleeve and between the tape and plate. The productivity is increased, total handling time is reduced and printing defects are eliminated
- Grooves in the adhesive are created by a cross-hatch pattern from the release liner
- Plate easily demounts from the double coated cushioned tape without adhesive residue
- Tape also removes cleanly from the sleeve or steel print cylinder
- Flexographic printing, flexographic printers
- Cushioned flexographic plate mounting sticky back foam tape
This 0.015 inch (0.38 mm) pink, double coated foam tape has the air release feature adhesive with easy plate side removal.
Provides high quality light-medium combination print. The adhesives remove cleanly from the print plate and the print cylinder.
Pošljite nam sporočilo
Zahvaljujemo se vam za zanimanje za 3M. Da bomo na vaše vprašanje odgovorili v najkrajšem možnem času, vas vljudno prosimo, da navedete nekaj ključnih informacij, vključno z vašimi kontaktnimi podatki. Na osnovi posredovanih podatkov, bo na vaše vprašanje odgovoril po e-pošti ali telefonu predstavnik podjetja ali eden od naših pooblaščenih poslovnih partnerjev, s katerimi bomo morda delili vaše osebne podatke v skladu s politiko zasebnosti 3M.
Zahvaljujemo se vam, da ste se obrnili na podjetje 3M
Prejeli smo vaše sporočilo in zdaj obravnavamo vašo poizvedbo
Naš predstavnik vas bo kontaktiral po telefonu ali e-pošti.
An error occurred.
