1. Slovenija
  2. All 3M Products
  3. Filtration & Separation
  4. Filter Cartridges & Media
  5. Pleated Membrane Cartridges
  6. 3M™ Betafine™ PPG Series Filter Cartridge, PPG020B01BA, 10 in, 0.2 μ, 6/Case

3M™ Betafine™ PPG Series Filter Cartridge, PPG020B01BA, 10 in, 0.2 μ, 6/Case

3M ID 70020011485
  • Advanced Pleat Technology Construction for High Surface Area as compared to competitive filters: higher product throughputs for prolonged service life, lower total filtration operating costs, and lower pressure drops for higher flow rates.
  • Absolute-rated Filter Performance. Higher product quality and yields.
  • Graded-porosity Multi-layer Filter Media. Capture of contaminant throughout the filter media to help maximize filter life. Higher contaminant holding capacity.
  • Polypropylene Construction Free of Adhesives and Surfactants. Very low extractable levels for optimum filtrate purity. Broad chemical compatibility for most aggressive process applications.
 More...
View all details
Specifications
Attribute Name
Value
Applications
Bulk Chemical Filtration, Solvent Filtration
Brand
Betafine™
End Modification
226 O-Ring and Spear
Factory Integrity Tested
No
Filter Material
Graded Density Polypropylene
Filter Type
Surface
Gasket/O-ring Material
Silicone
Industries
Life Sciences
Maximum Operating Temperature (Celsius)
80 Degree Celsius
Micron Rating
0,2 μm ABS
Product Series
PPG
Product Type
Cartridge
Series
Betafine™ PPG Series
Units per Case
6
Product Details
  • Advanced Pleat Technology Construction for High Surface Area as compared to competitive filters: higher product throughputs for prolonged service life, lower total filtration operating costs, and lower pressure drops for higher flow rates.
  • Absolute-rated Filter Performance. Higher product quality and yields.
  • Graded-porosity Multi-layer Filter Media. Capture of contaminant throughout the filter media to help maximize filter life. Higher contaminant holding capacity.
  • Polypropylene Construction Free of Adhesives and Surfactants. Very low extractable levels for optimum filtrate purity. Broad chemical compatibility for most aggressive process applications.
  • 100% Integrity Tested Versions Available. Prequalification and consistency in critical applications. Suitable for final filtration in many applications.
  • Robust polypropylene cartridge construction – extends service life and compatible with a wide range of solvents and cleaning solutions

This absolute-rated, graded-porosity multi-layer 100% polypropylene pleated filter features Advanced Pleat Technology (APT) that increases the usable filtration surface area while maintaining standard filter dimensions.

The service life of a pleated filter is often dictated by the accessible surface area. Conventional pleated filters may offer a large gross surface area, but when the media is packed too tightly into the cartridge, only part of the surface area is usable resulting in both flow restrictions and limited contaminant holding capacity. The "blind" or unusable area commonly occurs near the inside diameter where the pleats are packed most tightly. The Betafine PPG and PTG series filter is manufactured using a staggered pleat configuration that, when combined with a novel support material, provides more open space between the pleats. The APT staggered pleats with increased open area allow for greater contaminant loading between pleats at the inside diameter, while the reduced length pleats take advantage of existing open space closer to the filter's outside diameter. The result is a fully used surface area that provides superior service life.