3M™ Dynamar™ Polymer Processing Additive FX 5922, 20 kg, Case
- Dynamar PPA FX 5922 lowers apparent melt viscosity and permits fabricators to use high strength resins which otherwise could not be processed on available equipment. As a processing additive Dynamar PPA FX 5922 can reduce or eliminate melt fracture and can reduce extruder torque. Through optimization of the extrusion process, the use of FX 5922 may also allow an increase in output and yield films with enhanced and balanced bi-directional physical properties and improved clarity and gloss
- Dynamar PPA FX 5922 can offer performance and cost advantages. It exhibits exceptional commercial utility in low melt index film grade linear low density polyethylene (LLPDE) and high density polyethylene (HDPE). It is especially effective in polyolefin resins containing talc and silica-based anti-blocking agents, titanium dioxide-based pigments, and other inorganic additives. It can also be used at low levels to reduce extruder die build-up when processing LDPE, EVA and other polyolefin resins
- Reduces or eliminates die build-up
- Ideal for use in polyolefin resins containing anti-blocking agents, pigments and other inorganic additives
3M™ Dynamar™ Polymer Processing Additive FX 5922
Special Features Broadens extrusion processing capabilities of polyolefin resins, Lowers apparent melt viscosity, Excellent thermal stability.
- Dynamar PPA FX 5922 lowers apparent melt viscosity and permits fabricators to use high strength resins which otherwise could not be processed on available equipment. As a processing additive Dynamar PPA FX 5922 can reduce or eliminate melt fracture and can reduce extruder torque. Through optimization of the extrusion process, the use of FX 5922 may also allow an increase in output and yield films with enhanced and balanced bi-directional physical properties and improved clarity and gloss
- Dynamar PPA FX 5922 can offer performance and cost advantages. It exhibits exceptional commercial utility in low melt index film grade linear low density polyethylene (LLPDE) and high density polyethylene (HDPE). It is especially effective in polyolefin resins containing talc and silica-based anti-blocking agents, titanium dioxide-based pigments, and other inorganic additives. It can also be used at low levels to reduce extruder die build-up when processing LDPE, EVA and other polyolefin resins
- Reduces or eliminates die build-up
- Ideal for use in polyolefin resins containing anti-blocking agents, pigments and other inorganic additives
- For use at very low levels
- Free-flowing fluoropolymer-based processing additive
- Can offer performance and cost advantages
|
Attribute Name
|
Value
|
|---|---|
|
Capabilities
|
Color Changeover Improvement
|
|
Container Type
|
Case
|
|
Net Weight (Metric)
|
20 kg
|
|
Processing Concern
|
Color Hangup, Die Build-up Reduction, Limited Throughput, Melt Fracture to Clear, Surface Roughness
|
|
Product Form
|
Granular
|
|
Shelf Life
|
2 Year
|
|
Weight (Metric)
|
20 Kilogram
|
Pošljite nam sporočilo
Zahvaljujemo se vam za zanimanje za 3M. Da bomo na vaše vprašanje odgovorili v najkrajšem možnem času, vas vljudno prosimo, da navedete nekaj ključnih informacij, vključno z vašimi kontaktnimi podatki. Na osnovi posredovanih podatkov, bo na vaše vprašanje odgovoril po e-pošti ali telefonu predstavnik podjetja ali eden od naših pooblaščenih poslovnih partnerjev, s katerimi bomo morda delili vaše osebne podatke v skladu s politiko zasebnosti 3M.
Zahvaljujemo se vam, da ste se obrnili na podjetje 3M
Prejeli smo vaše sporočilo in zdaj obravnavamo vašo poizvedbo
Naš predstavnik vas bo kontaktiral po telefonu ali e-pošti.
An error occurred.
