3M™ Fit Test Kit, Qualitative, Bitter, FT-30

3M ID 70070709640Catalog Number FT-30
  • Fit test kits and accessories can be used to check respirator fit
  • FT-10 uses a test solution of sodium saccharin that produces a sweet tasting aerosol
  • FT-30 uses a test solution of denatonium benzoate to produce a bitter tasting aerosol
  • Spare hoods, nebulisers and solutions are available for the fit test kits
 More...
View all details
Product Details

Test kits and accessories designed to help your organisation meet regulatory fit testing requirements for tight fitting respirators. The kits can be used to validate face to respirator seal on any disposable respirator or half mask respirator. Not suitable for fit testing full facepiece respirators - this must be through Quantitative face fit testing.

The products can be used to validate face-to-respirator seal on any disposable respirators or half mask respirators. To fit test a halfmask respirator, it must be fitted with a P3 particulate filter for the fit test. 3M™ offers two Qualitative Fit Test Apparatus Kits FT-10 (Sweet) and FT-30 (Bitter). FT-10 uses a test solution of sodium saccharin that produces a sweet tasting aerosol. FT-30 uses a test solution of denatonium benzoate to produce a bitter taste. The choice between the bitter and sweet test kit is a personal one. However, a small percentage of the population is unable to detect saccharin in which case the bitter test must be used (and visa versa if the bitter cannot be detected then the sweet must be used). 3M recommends users are face-fit tested before using a respirator and repeated regularly as part of their occupational respiratory protection program. Follow all applicable national and other guidance with respect to face fit testing. If not available, please see ISO 16975-3 or contact 3M.

  • Fit test kits and accessories can be used to check respirator fit
  • FT-10 uses a test solution of sodium saccharin that produces a sweet tasting aerosol
  • FT-30 uses a test solution of denatonium benzoate to produce a bitter tasting aerosol
  • Spare hoods, nebulisers and solutions are available for the fit test kits
  • For Occupational Use Only
  • 3M™ recommends users are face-fit tested before using a respirator and repeated regularly as part of their occupational respiratory protection program. Follow all applicable national and other guidance with respect to face fit testing. If not available, please see ISO 16975-3 or contact 3M™
  • Follow all applicable national and other guidance with respect to face fit testing. If not available, please see ISO 16975-3 or contact 3M™
Specifications
Attribute Name
Value
Accessories
Yes
Cartridge or Filter Included
No
Case Quantity
1
Product Type
Fit Test Kit
Recommended Application
Fit Testing
Solution Type
Bitter
Contact Us

Pošljite nam sporočilo

Zahvaljujemo se vam za zanimanje za 3M. Da bomo na vaše vprašanje odgovorili v najkrajšem možnem času, vas vljudno prosimo, da navedete nekaj ključnih informacij, vključno z vašimi kontaktnimi podatki. Na osnovi posredovanih podatkov, bo na vaše vprašanje odgovoril po e-pošti ali telefonu predstavnik podjetja ali eden od naših pooblaščenih poslovnih partnerjev, s katerimi bomo morda delili vaše osebne podatke v skladu s politiko zasebnosti 3M.

  •  
  •  
  •  
  •  
  •  
  • 3M takes your privacy seriously. 3M and its authorized third parties will use the information you provided in accordance with our Privacy Policy to send you communications which may include promotions, product information and service offers. Please be aware that this information may be stored on a server located in the U.S. If you do not consent to this use of your personal information, please do not use this system.

  • Pošlji sporočilo

Zahvaljujemo se vam, da ste se obrnili na podjetje 3M

Prejeli smo vaše sporočilo in zdaj obravnavamo vašo poizvedbo
Naš predstavnik vas bo kontaktiral po telefonu ali e-pošti.

An error occurred.