Posted 2011-11-07
Discontinuation Notice: Accessories that are used with the 256-02-00 and 256-02-01 Portable Compressed Air Filter and Regulator Panel Products
Effective immediately, the 529-05-20 Remote Alarm, Audible product will include a strobe light in addition to the audible alarm that is already a part of the product. The product name will change to 529-05-20 Remote Alarm and Strobe, but the product number, UPC, and 3M ID will remain the same. With the modified 529-05-20 Remote Audible Alarm and Strobe available, 3M is announcing the discontinuation of the 529-05-21 Remote Alarm Strobe Light and the 529-05-23 Y-Plug Adapter. These products will be discontinued on December 1, 2011.
Discontinuation Notice (PDF 35 KB)
Posted 2011-10-13
Discontinuation Notice: 3M™ E-A-Rbuds™ Noise Isolating Headphones used with MP3 players
Occupational Health and Environmental Safety Division (OH&ESD) is discontinuing the 3M™ E-A-Rbuds™ Noise Isolating Headphones for use with MP3 players. This product is currently undergoing improvements and will be relaunched in early October.
Discontinuation Notice (PDF 13 KB])
Posted 2011-10-07
Discontinuation Notice: Airflex Fall Protection Harnesses
Effective immediately, the 3M™ Airflex Harnesses will no longer be available from 3M.
Discontinuation Notice (PDF 35 KB)
Posted 2011-09-30
Discontinuation Notice: 3M™ Kinetic Davit System and 3M™ Aerospace Horizontal Lifeline System
Effective immediately, the 3M™ Kinetic™ Davit System and 3M™ Aerospace Horizontal Lifeline System will no longer available from 3M.
Discontinuation Notice (PDF 20 KB)
Discontinuation Notice (PDF 27 KB)
Posted 2011-08-08
Product Discontinuation Notice: 3M™ Swivel Anchor 4002 1 ea/case
OH&ESD is announcing the immediate discontinuation of 3M™ Base Plate Anchor 4002. Please see the attached letter for more information.
Discontinuation Notice (PDF 14 KB)
Posted 2011-08-07
Discontinuation Notice: 3M™ Quest™ Vibration Measurement Systems
The 3M™ Quest Vibration Measurement Systems are being discontinued. The VI-410 meters are discontinued immediately. The HAVPro and VI-100 Vibration Measurement Systems are being discontinued effective end of year, December 31, 2011. This discontinuation is necessary due to the unavailability of products and component parts. Please contact your designated 3M Quest Sales Coordinator or Regional Sales Manager with questions or concerns.
Discontinuation Notice (PDF 40 KB)
Posted 2011-07-29
Discontinuation Notice: Selected 3M™ Protective Eyewear SKUs: Maxim™ and Lexa™ with MinimizeR™ and I/O Coatings, Maxim Safety Splash Goggle (Standard Version) and Fuel™ Eyewear Display
As part of our continuing efforts to offer a full yet streamlined product portfolio, we are discontinuing some SKUs for the Maxim™, Lexa™ and Fuel™ series of Protective Eyewear. This includes the discontinuation of the MinimizeR and I/O coating versions of the Maxim and Lexa protective eyewear, along with the discontinuation of standard Maxim safety splash goggles. This discontinuation is effective immediately.
Discontinuation Notice (PDF 40 KB)
Discontinuation Notice (PDF 227 KB)
Discontinuation Notice (PDF 59 KB)
Notice: 3M™ LR50™ Suspension Replacement (PDF 47 KB)
Notice: Selected 3M™ Protective Easy-Change™ Polycarbonate Faceshields (PDF 19 KB)
Product Discontinuation Notice (PDF 55 KB)
Product Discontinuation Notice (PDF 68 KB)
Product Discontinuation Notice (PDF 19KB)
Posted 2011-01-17
3M™ Macurco™ Fixed Gas Carbon Monoxide Detectors CM-1B, CM-2B, CM-3 and CS102A Discontinuation
Effective December 31, 2010, 3M™ Macurco™ Fixed Gas Carbon Monoxide Detectors CM-1B, CM-2B, CM-3 and CS102A are being discontinued. The newly released 3M™ Macurco™ Carbon Monoxide (CO) Detector, Controller and Transducer CM-6 is the replacement product for the CM-1B, CM-2B and CM-3. The replacement for the CS102 is the 3M™ Macurco™ CM-4 Detector.
Posted 2010-12-03
The 3M™ Macurco™ Combustible Fixed Gas Detectors GD-1-SPC-PRO and GD-1-SPC-NG are Discontinued
With its quick installation and intuitive and easy operation, the 3M™ Macurco Combustible Fixed Gas Detector GD-2A is the direct replacement for the discontinued models.
Posted 2010-10-11
Select 3M™ H-Series Hoods are Now Discontinued
Please see the attached document for detailed information on the discontinued 3M™ H-Series Hoods and suggested replacement products.
(PDF 16 KB)
Posted 2010-08-17
Select 3M™ Breathe Easy™ Cartridge Discontinuation
Select 3M™ Breathe Easy™ Cartridges will be discontinued effective November 1st. 2010. These cartridges are used as a component of 3M Breathe Easy Powered Air Purifying Respirators (PAPR). Each discontinued cartridge has a replacement option - see notice for full details.
Posted 2010-05-26
3M™ Macurco™ CM-15A 12-24V CO Detector
Effective immediately, 3M OH&ESD is announcing the discontinuation of the 3M™ Macurco™ CM-15A 12-24V CO Detector. For those customers who need a UL-approved CO Detector with similar specifications, we recommend the 3M™ Carbon Monoxide Fixed Gas Detector CM-E1, Stock Number 70-0715-4473-1 listed to UL2075.
Posted 2010-02-08
3M Gas Detection Consolidation (PDF 13 KB)Posted 2009-12-16
Select 3M™ Half and Full Facepiece Respirator Kits (PDF 25 KB) [] Posted 2009-11-16
Select 3M™ Industrial Store Front Packaged Kits (PDF 28 KB) Posted 2009-11-16
3M™ Full Facepiece 6800PD and 3M™ Full Facepiece 6900PD (PDF 16 KB) Posted 2009-02-01
Certain Powered and Supplied Air (P&SA) Product Parts (PDF 28 KB) Posted 2007-02-02
3M™ Air-Mate™ Self-Contained Breathing Apparatus (SCBA) (PDF 24 KB) Posted 2006-07-24
Posted 2006-01-13
[PDF 28 KB] Posted 2005-10-17
3M™ Air-Mate™ External Charging Cable Assembly 520-04-24 (PDF 23 KB) Posted 2005-09-27
3M™ Battery Pack 520-01-15R01, Black, NiCd 3M is announcing the immediate discontinuation and obsolescence of the 3M™ Battery Pack 520-01-15R01, Black, NiCd. This battery is replaced by the new 3M™ Battery Pack BP-15, NiMH which can only be charged with the new 3M™ Smart Battery Charger BC-210.
Posted 2005-06-17
3M™ Air Crown Headgear Assembly Products
3M is announcing the immediate discontinuation and obsolescence of the following 3M™ Air Crown Headgear products because the resin used to manufacture them is no longer available.
All other replacement parts and accessories for the Air Crown Headgear will be available until December 2006. There is no direct replacement available for the discontinued parts. Depending upon the application, the most suitable products are as follows:
All of these products are approved for use with the 3M™ Breathe Easy™ Belt-Mounted Turbo Powered Air Purifying Respirator (PAPR).
Posted 2005-04-17
3M™ Whitecap™ Abrasive Blasting Helmet Assembly W-8100
3M is no longer able to source the 3M™ Whitecap™ Abrasive Blasting Helmet Assembly W-8100, White, and is announcing this product's discontinuation effective May 1, 2005. It is recommended that the 3M™ Whitecap™ Abrasive Blasting Helmet Assembly W-8100B, Black, be a direct replacement of the 3M™ Whitecap™ Abrasive Blasting Helmet Assembly W-8100, White.
Posted 2005-04-17
3M™ Comfort Mask 8500 (PDF 81 KB)Posted 2003-06-02