3M™ High Flow Series Filter Cartridge, HF40PP0005A01, 40 in, 0.5 µm, Silicone, 1/CS
- Part Number HF40PP0005A01
- 3M ID 7100306098
- UPC 06943823678121
Do more with less.
Save up to 30% on the total cost of filtration* with the 3M™ High Flow Series Filter Cartridge, 0.5 µm.
*Compared to traditional 2.5” diameter filter cartridges
-
Higher efficiency. Lower cost.Removing particles as small as 0.5 µm during the prefilter process can pay big dividends down the line – like up to 30% filtration cost savings *
*Compared to traditional 2.5” diameter filter cartridges.
-
Better fluids, better results.The higher quality of your source water after prefiltration, the better your whole process will be – especially the consistency and quality of your final products.
-
Defense down the line.High flow filtration does some of the upstream heavy lifting (microbial or micro-particle reduction) so your more expensive downstream membrane filters last longer.
-
Fewer change-outs. Less waste.When your filters last longer, they require fewer change-outs, which reduces downtime and saves on labor costs. Plus, this filter can do the work of multiple traditional filters, meaning less waste going into landfills.
-
The new 0.5 µm 3M High Flow filter cartridge provides these additional benefits:
- Microbial reduction for yeast and cryptosporidium
- Up to 30% total cost of filtration reduction*
- Greater efficiency gained at high capacity with the tighter micron rating
All of which mean the new 0.5 µm High Flow filter can provide excellent downstream membrane filter protection.
*Compared to traditional 2.5” diameter filter cartridges
Details
Highlights
- Proprietary diamond pleat design optimizes usable surface area of the cartridge to maximize filter life
- Highest flow rate among 3M large format filters allows for operational flexibility to maintain process flow requirements
- Ergonomic horizontal design with a twist-to-lock handle allows for faster and easier cartridge installation and removal
- High flow capability enables fewer cartridges, which results in reduced cartridge handling and disposal, reduced filter change-out time and less individual cartridge seal points to help achieve sustainability goals
- Outside-to-inside flow construction allows for compact housing design
- Absolute-rated polypropylene filter provides consistent performance, effluent quality and broad chemical compatibility
- Extensive food contact compliance* *For details related to specific use conditions or limitations for food contact applications, please contact your 3M Representative for more information
- Looking for a high-quality filter cartridge with inside-outside flow capabilities that can be retrofitted to your existing system? View the 3M™ High Flow HFR Series Filter
3M™ High Flow Series HF and HFM Filter Cartridges offer high efficiency and outside-to-inside flow for food and beverage, industrial water and oil and gas applications. Each cartridge has an ergonomic design and a pleat style that provides a large surface area for a long life with a reduced number of change-outs and labor savings for your application.
3M™ High Flow Series Filter Cartridge
3M™ High Flow Series HF and HFM Filter Cartridges provide high flow capability in an outside-to-inside flow path that allows for small housing sizes and reduces the number of cartridges needed for your application, resulting in lower labour costs and a more sustainable solution. With a single open-end design and fewer individual cartridge seal points than 2.5 inch filters, these filter cartridges also help to reduce the chance of fluid bypass.
-
High flow capability.Designed to accommodate high flow rates for industrial applications, 3M™ High Flow Series Filters require fewer filters to maintain your process flow requirements.
-
Diamond pleat construction.Our proprietary diamond pleat design provides large surface area to help maximise filter loading capacity for a long filter life and a reduced number of required change-outs.
-
Horizontal set-up.3M High Flow Series Filters feature a horizontal ergonomic design in the 40 and 60 inch versions.
-
Ergonomic design.Featuring a twist-to lock mechanism, filter change-outs are quick and easy and do not require any special tools or hardware for installation or removal.
3M™ High Flow Series Filter Cartridges are available in two types of system designs.
-
3M™ High Flow HF Series Filter CartridgesThese high flow filter cartridges offer great particulate removal and surface filtration for a variety of industrial applications.
-
3M™ High Flow HFM Series Filter CartridgesFeaturing a thick media, these high flow filters are designed to filter deformables and organics. They also help prevent premature blinding of the filter’s outer surface, promoting fuller utilisation of the media for an optimal combination of particle removal efficiency and contaminant holding capability.
Each grade of the 3M™ High Flow Series Filters systems is manufactured in polypropylene material. The blown microfiber (BMF) media provides high particle reduction efficiency and a broad chemical compatibility. No adhesives, binders, or silicone are used in the manufacturing process. O-rings are available in a variety of materials to suit your applications. The maximum design flow through the High Flow HF and HFM cartridges is 85 gpm for 10 inch length, 350 gpm for 40 inch length and 500 gpm for 60 inch length filter cartridges. Results will vary depending on process conditions. Ratings from 1 to 70 micron absolute or 5 micron nominal are available. The maximum forward differential pressure is 50psid at 68°F (3.4 bar at 20°C) and the recommended change-out pressure is 35psid at 68°F (2.4 bar at 20°C). Work with your local distributor to find the right high flow filter housing for your industrial filtration needs.
Suggested applications
- Industrial: Process water, RO/membrane prefiltration, coolants, nozzle protection, boiler condensate, reclaimed water, waste water
- Chemical: Quench water, aqueous salt solutions, final products
- Petrochemicals: Waterflooding, produced water, enhanced oil recovery, completion fluids, amine sweetening, final products
- Electronics: RO prefiltration, process water
- Food and beverage*: Process and blending water, D.E. trap filtration, barrel char removal, prefiltration for final bottling *For details related to specific use conditions or limitations for food contact applications please contact your 3M Representative for more information
Specifications
Resources
