1. United States
  2. All 3M Products
  3. Abrasives
  4. Abrasive Belts
  5. Cloth Belts
  6. 3M™ Cubitron™ II Cloth Belt 970DZ, 120 + Y-weight, 8 in x 150 in, Film-lok, Single-Flex, 10 ea/Case

3M™ Cubitron™ II Cloth Belt 970DZ, 120 + Y-weight, 8 in x 150 in, Film-lok, Single-Flex, 10 ea/Case

  • 3M Product Number 970DZ
  • 3M ID 7100265920
  • UPC 00638060894439

Powered by 3M Precision-Shaped Grain that cuts faster and lasts longer than conventional abrasives

Open coat construction and anti-static treatment reduce loading for enhanced cut-rate and longer belt life

Heavyweight cloth backing offers durability for coarser grades and is especially suited to wide belt and edge sanding

View more details
Frequently viewed resources
Safety Data Sheet (PDF, 0B)
Overall Width (Metric) 203.2 mm
Overall Width (Imperial) 8 in
Grit 120+
Backing Weight Y Weight
Overall Length (Metric) 3,810 mm
Overall Length (Imperial) 150 in

Details

Highlights
  • Powered by 3M Precision-Shaped Grain that cuts faster and lasts longer than conventional abrasives
  • Open coat construction and anti-static treatment reduce loading for enhanced cut-rate and longer belt life
  • Heavyweight cloth backing offers durability for coarser grades and is especially suited to wide belt and edge sanding
  • Resin bond withstands high heat and pressure for longer service life
  • Performs well on all wood types
  • Available in grades 80+, 120+, 150+, 180+ and 220+

3M™ Cubitron™ II Cloth Belt 970DZ is a best-in-class heavy cloth sanding belt powered by our fast-cutting, long-lasting 3M Precision-Shaped Grain. The belt is designed for medium grade operations on wide belt or edge sanders.

A premium belt, built to perform.
3M™ Cubitron™ II Cloth Belt 970DZ resists heat in wood sanding applications, produces a uniform finish over the life of the product and helps eliminate burning during end-grain sanding. The heavyweight cloth backing provides durability, and the ceramic 3M Precision-Shaped Grain mineral is resin-bonded to the backing for reliable performance, even under high heat and pressure.

To reduce premature belt loading, 3M™ Cubitron™ II Cloth Belt 970DZ is engineered with an open-coat construction and an anti-static coating on the abrasive. The anti-static coating optimizes dust collection when used with an efficient dust collection system.

Powered by 3M Precision-Shaped Grain
Like all 3M™ Cubitron™ II Abrasives, this 970DZ Belt is powered by our fast-cutting, long-lasting 3M Precision-Shaped Grain. This triangular ceramic grain continuously fractures to create new, sharp cutting edges throughout the life of the belt. The result is a high-performance belt that helps boost productivity and can lower your shop’s overall abrasive spend.

Typical properties

Resources

Reviews

Large Volume Order

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.