3M™ Scotchlite™ Reflective Material 5721 Silver Graphic Transfer Film, Config Roll
- 3M Product Number 5721
- 3M ID 7100121718
Specifications
Details
Highlights
- 3M™ Scotchlite™ Reflective Material is designed for enhancing visibility in low light and nighttime conditions
- When combined with 3M™ 571K Ink Kit, forms a system to make silver reflective graphic transfers for screen printing and heat lamination
- Available in sheets or rolls with a paper liner
- For approved professional screen printers. Contact 3M Scotchlite Technical Service before purchasing
- Heat transfer application
Silver Graphic Transfer Film with paper liner and 571K Ink Kit form a system to make reflective transfer graphics by screen-printing and heat lamination.
3M™ Scotchlite™ Reflective Graphic Transfers are made by screen printing an adhesive in reverse print onto the back side of a sheet of retroreflective lenses. The printed transfer is then heat laminated directly to fabric. Non-reflective colors can also be combined with the transfer for added design capabilities. The resulting transfer graphic is composed of wide angle, exposed retroreflective lenses bonded to a heat activated adhesive. When properly applied the resulting transfer graphic is designed to help enhance the visibility of the wearer in nighttime or low-light conditions. The retroreflective surface, when illuminated by a light source, such as automobile headlights, returns the light back toward the original source reaching the automobile driver’s eyes. The visibility of a person wearing garments incorporating Scotchlite reflective material can be optimized when the reflective material outlines the human form, is placed in movement locations, allows 360 degree visibility, and is present in sufficient amounts. Scotchlite reflective material – silver graphic transfer film system is designed for use on cotton, polyester, and cotton polyester blends.
Resources
Large Volume Order
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
