1. United States
  2. All 3M Products
  3. Tapes
  4. Foam Tapes
  5. General Purpose Foam Tapes
  6. 3M™ Urethane Foam Tape 4116, Natural, 1/4 in x 36 yd, 62 mil, 36 Roll/Case

3M™ Urethane Foam Tape 4116, Natural, 1/4 in x 36 yd, 62 mil, 36 Roll/Case

  • Part Number 4116
  • 3M Product Number 4116
  • 3M ID 7010331690
  • UPC 00021200033988
Overall Width (Metric) 6.35 mm
Overall Width (Imperial) 0.25 in
Backing (Carrier) Material Urethane
Product Color Natural
Adhesive Type Acrylic
Number of Adhesive Sides Single-sided

Natural, 0.062 in. (1.5 mm) firm, high-density open-cell foam design helps trap moisture, dust and contaminants

Allows air or gas vapors to pass through for a breathable seal

Dampens sounds and absorbs vibration when used in electronic applications

View more details
Frequently viewed resources
PDF (1) Copy 26Tech Data Sheet (PDF, 121KB)

Details

Highlights
  • Natural, 0.062 in. (1.5 mm) firm, high-density open-cell foam design helps trap moisture, dust and contaminants
  • Allows air or gas vapors to pass through for a breathable seal
  • Dampens sounds and absorbs vibration when used in electronic applications
  • Excellent cushioning characteristics and high absorbency
  • Offers high initial quick-stick to multiple substrates
  • Provides excellent shear strength and high temperature performance

3M™ Urethane Foam Tape 4116 is a firm, high-density, open-cell foam tape with a pressure sensitive acrylic adhesive on one side. This tape will adhere to a variety of substrates and can be used in numerous applications to dampen sound and create a clean and durable product.

Seals Out Moisture, Dust and Drafts
3M™ Urethane Foam Tape 4116 is 1/16 in. thick, comprised of a firm, high-density, open-cell foam with a pressure sensitive acrylic adhesive on one side. The adhesive is protected by a silicone treated paper liner. It offers excellent cushioning characteristics while allowing air or gas vapors to pass through, while providing high absorbency to seal out moisture, dust and drafts. It can perform under a wide range of temperatures. Special note: 3M™ Urethane Foam Tape 4116 may turn yellow when exposed to light, only affecting its appearance and not physical performance.

Recommended Applications
  • Cushion and dampen sound in electronics such as printers, keyboards, computers, aircraft lights and automotive dashboards
  • Recessed lighting
  • Door, window and cabinet seals

3M™ Urethane Foam Tape 4116 is 1/16 in. thick, comprised of a firm, high-density, open-cell foam with a pressure sensitive acrylic adhesive on one side.
3M Urethane Foam Tape 4116 can be used for door, window, and cabinet seals
Excellent Shear Holding Strength with 3M™ Adhesive 350
3M™ Urethane Foam Tape 4116 features 3M™ Adhesive 350. This pressure sensitive, modified acrylic adhesive provides high initial quick-stick to a variety of surfaces and substrates. It has an excellent chemical resistant and shear holding strength, even at elevated temperatures. Adhesive 350 is designed to perform at temperatures up to 200°F (93°C) in the short term and 350°F (176°C) long term.

Protect Sensitive Components
The adhesion of 3M™ Single-Coated Foam Tapes is typically satisfactory within 20 minutes and continues to build with additional time. The adhesive is protected by a thick, silicone treated paper liner and has a firm, high-density foam. This design offers an attractive and clean appearance after application.

What is Open Cell Foam?
Open cell foams are commonly used between component panels where a degree of separation is needed to dampen or prevent vibration, as a thermal insulation barrier and to protect against contamination, but where a measure of airflow is still necessary, such as with electronic components where air flow helps keeps components cool.

Typical properties

Resources

Reviews

Ask a 3M Expert

Ask a 3M Expert

Thank you for your interest in 3M Industrial Adhesive & Tape solutions. A 3M Representative will get back to you by phone or email.

Similar products

Overall Width (Metric) 6.35 mm
Overall Width (Imperial) 0.25 in
Backing (Carrier) Material Urethane
Product Color Natural
Adhesive Type Acrylic
Number of Adhesive Sides Single-sided
For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.