3M™ 5411A Series Molded Rubber QS-II Splice Kit is a 1-piece inline splice designed to use on 15kV jacketed concentric neutral (JCN) or concentric neutral (CN) cables. The cold shrink jacket has peroxide-cured EPDM rubber construction to ensure moisture resistance and durability.
3M™ 5411A Series Molded Rubber QS-II Splice Kit is suitable to use on cables that can withstand a maximum temperature of 90 degrees C. It provides an electric connection of outer conducting jacket to a cable semi-conductive jacket. The jacketing kit is needed for JCN cable. A cone-shaped device called the "Porta-Pencil" in the kit is used when sliding the splice body onto the cable. The kit meets the requirements of IEEE 404 standards.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.