3M™ PILC Accessory Oil Stop Kit is specifically designed to seal the oil inside the paper insulated, lead covered cable. The kit offers an accessory ground lead and it environmentally seals the accessory end, as well as the cable jacket.
3M™ PILC Accessory Oil Stop Kit contains all the necessary accessories that are required for sealing PILC cables. It includes a cold shrink oil stop tube, cold shrink jacket tube, white restricting tape, Scotch® Rubber Tape 130C, Scotch® Semi Conducting Tape 13, a ground lead with accessory bleed wire and mastic seal strips. IEEE Approved.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.