1. United States
  2. All 3M Products
  3. Electrical
  4. Power Cable Connectors
  5. Separable Connectors
  6. 3M™ PILC Accessory Oil Stop Kit 5111-OS, 15-25/28 kV

3M™ PILC Accessory Oil Stop Kit 5111-OS, 15-25/28 kV

Part Number 5111-OS3M ID 7100164702UPC 00054007434054
  • Seals the oil inside the paper-insulated, lead-covered cable
  • Environmentally seals the accessory end, as well as the cable jacket
  • IEEE Approved
 More...
View all details
View Legal Disclaimer
For industrial/occupational use only. Not for consumer sale or use.
Specifications
Attribute Name
Value
Brand
3M™
Cable Shielding
Paper Insulated Lead Covered (PILC)
Conductor Sizes (Imperial)
1 AWG, 1/0 AWG, 2 AWG, 2/0 AWG, 250 kcmil, 3/0 AWG, 300 kcmil, 4/0 AWG
Family
200 amp Load Break Accessories
Manufacturing Origin
USA
Maximum Insulation Diameter (Over Paper)
0.72 in
Maximum Insulation Diameter (Over Paper) (Metric)
18.3 mm
Maximum Lead Diameter
1.3 in
Maximum Lead Diameter (Metric)
33.0 mm
Maximum Operating Voltage
25/28 kV
PlantAnalystID
ABBA-Z1GUQ
Product Series
5110-OS Series
Product Type
Accessory
RoHS 2011/65/EU Compliant
Undetermined
RoHS EU Comments
Contact 3M for information
Units per Case
1
Voltage
15 kV, 25/28 kV
Details
  • Seals the oil inside the paper-insulated, lead-covered cable
  • Environmentally seals the accessory end, as well as the cable jacket
  • IEEE Approved

3M™ PILC Accessory Oil Stop Kit is specifically designed to seal the oil inside the paper insulated, lead covered cable. The kit offers an accessory ground lead and it environmentally seals the accessory end, as well as the cable jacket.

3M™ PILC Accessory Oil Stop Kit contains all the necessary accessories that are required for sealing PILC cables. It includes a cold shrink oil stop tube, cold shrink jacket tube, white restricting tape, Scotch® Rubber Tape 130C, Scotch® Semi Conducting Tape 13, a ground lead with accessory bleed wire and mastic seal strips. IEEE Approved.

Legal Disclaimer

Manufacturing Origin: USA

The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.

Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.