1. United States
  2. All 3M Products
  3. Electrical
  4. Power Cable Connectors
  5. Power Cable Terminations
  6. 3M™ Cold Shrink QT-III 3/C Termination Kit 7624-T-125-3-RJS, Tape/Wire/UniShield®, 5-20 kV, Insulation OD 0.92-1.18 in, 3/kit

3M™ Cold Shrink QT-III 3/C Termination Kit 7624-T-125-3-RJS, Tape/Wire/UniShield®, 5-20 kV, Insulation OD 0.92-1.18 in, 3/kit

Part Number 7624-T-125-3-RJS3M ID 7100164674UPC 00054007047155
  • Provides a void-free seal to tape shield, wire shield and UniShield® power cables
  • High dielectric-constant material regulates the distribution of electric field stress
  • Suitable for indoor applications and cabinet-mount installations
  • Integrated design allows for easier installation, while sealing compounds provide constant radial pressure
 More...
View all details
For industrial/occupational use only. Not for consumer sale or use.
Specifications
Attribute Name
Value
Brand
3M™
Breakout Boot
No
Cable Insulation Outside Diameter Range
0.92-1.18 in
Cable Insulation Outside Diameter Range (Metric)
23.4-30.0 mm
Cable Shielding
Tape Shield, UniShield®, Wire Shield
Case Quantity
1
Conductor Sizes (Imperial)
250 kcmil, 300 kcmil, 350 kcmil, 400 kcmil, 500 kcmil, 600 kcmil, 700 kcmil, 750 kcmil
Family
QT-III
Indoor/Outdoor
Indoor Non-skirted
Insulation Level
100%, 133%
Insulation Outer Diameter (Imperial)
0.92 in, 0.93 in, 0.94 in, 0.95 in, 0.96 in, 0.97 in, 0.98 in, 0.99 in, 1 in, 1.01 in, 1.02 in, 1.03 in, 1.04 in, 1.05 in, 1.06 in, 1.07 in, 1.08 in, 1.09 in, 1.1 in, 1.11 in, 1.12 in, 1.13 in, 1.14 in, 1.15 in, 1.16 in, 1.17 in, 1.18 in
Insulation Outer Diameter (Metric)
23.368 mm, 23.622 mm, 23.876 mm, 24.13 mm, 24.384 mm, 24.638 mm, 24.892 mm, 25.146 mm, 25.4 mm, 25.654 mm, 25.908 mm, 26.162 mm, 26.416 mm, 26.67 mm, 26.924 mm, 27.178 mm, 27.432 mm, 27.686 mm, 27.94 mm, 28.194 mm, 28.448 mm, 28.702 mm, 28.956 mm, 29.21 mm, 29.464 mm, 29.718 mm, 29.972 mm
Insulation Rejacketing
Yes
Lug/Stem Connector Included in Kit
No
Maximum Installed Length
10.50 in
Number of Conductors
3
PlantAnalystID
ABBA-Z1GUQ
Product Series
7600 RJS
RoHS 2011/65/EU Compliant
Undetermined
RoHS EU Comments
Contact 3M for information
Voltage
15 kV, 20 kV, 25 kV, 35 kV, 5 kV, 8 kV
Details
  • Provides a void-free seal to tape shield, wire shield and UniShield® power cables
  • High dielectric-constant material regulates the distribution of electric field stress
  • Suitable for indoor applications and cabinet-mount installations
  • Integrated design allows for easier installation, while sealing compounds provide constant radial pressure

3M™ Cold Shrink QT III 7600 T 3 RJS Series Termination Kit includes a non skirted, 3 phase termination. It ensures a pliable, tight seal for tape shield, wire shield and UniShield® power cables. The conjunction of high dielectric constant material and sealing compounds allows the termination to withstand voltages of 5 to 35kV.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.