1. United States
  2. All 3M Products
  3. Electrical
  4. Power Cable Connectors
  5. Power Cable Terminations
  6. 3M™ Cold Shrink QT-III 3/C Termination Kit 7625-T-95-3W, Tape/Wire/UniShield®, 5-15 kV, Insulation OD 1.18-1.52 in, 3/kit

3M™ Cold Shrink QT-III 3/C Termination Kit 7625-T-95-3W, Tape/Wire/UniShield®, 5-15 kV, Insulation OD 1.18-1.52 in, 3/kit

Part Number 7625-T-95-3W3M ID 80611443716UPC 00054007047353
  • Provides a void-free seal to tape shield, wire shield and UniShield® power cables
  • High dielectric-constant material regulates the distribution of electric field stress
  • Suitable for indoor applications and cabinet-mount installations
  • Integrated design allows for easier installation in limited spaces, while sealing compounds provide constant radial pressure
 More...
View all details
For industrial/occupational use only. Not for consumer sale or use.
Specifications
Attribute Name
Value
Brand
3M™
Breakout Boot
Yes
Cable Insulation Outside Diameter Range
1.18-1.52 in
Cable Insulation Outside Diameter Range (Metric)
30.0-38.6 mm
Cable Shielding
Tape Shield, UniShield®, Wire Shield
Case Quantity
1
Conductor Sizes (Imperial)
1000 kcmil, 750 kcmil, 800 kcmil, 900 kcmil
Family
QT-III
Indoor/Outdoor
Indoor Non-skirted
Insulation Level
100%, 133%
Insulation Outer Diameter (Imperial)
1.18 in, 1.19 in, 1.2 in, 1.21 in, 1.22 in, 1.23 in, 1.24 in, 1.25 in, 1.26 in, 1.27 in, 1.28 in, 1.29 in, 1.3 in, 1.31 in, 1.32 in, 1.33 in, 1.34 in, 1.35 in, 1.36 in, 1.37 in, 1.38 in, 1.39 in, 1.4 in, 1.41 in, 1.42 in, 1.43 in, 1.44 in, 1.45 in, 1.46 in, 1.47 in, 1.48 in, 1.49 in, 1.5 in, 1.51 in, 1.52 in
Insulation Outer Diameter (Metric)
24.892 mm, 29.972 mm, 30.226 mm, 30.48 mm, 30.734 mm, 30.988 mm, 31.242 mm, 31.496 mm, 31.75 mm, 32.004 mm, 32.258 mm, 32.512 mm, 32.766 mm, 33.02 mm, 33.274 mm, 33.528 mm, 33.782 mm, 34.036 mm, 34.29 mm, 34.544 mm, 34.798 mm, 35.052 mm, 35.306 mm, 35.56 mm, 35.814 mm, 36.068 mm, 36.322 mm, 36.576 mm, 36.83 mm, 37.084 mm, 37.338 mm, 37.592 mm, 37.846 mm, 38.1 mm, 38.354 mm, 38.608 mm
Insulation Rejacketing
Yes
Lug/Stem Connector Included in Kit
No
Maximum Installed Length
8.50 in
Number of Conductors
3
Voltage
15 kV, 5 kV, 8 kV
Details
  • Provides a void-free seal to tape shield, wire shield and UniShield® power cables
  • High dielectric-constant material regulates the distribution of electric field stress
  • Suitable for indoor applications and cabinet-mount installations
  • Integrated design allows for easier installation in limited spaces, while sealing compounds provide constant radial pressure

3M™ Cold Shrink QT III 7600 T 3W Series Termination Kit includes a non skirted, 3 phase termination. It ensures a pliable, tight seal for tape shield, wire shield and UniShield® power cables. The conjunction of high dielectric constant material and sealing compounds allows the termination to withstand voltages of 5 to 35kV.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.