1. United States
  2. All 3M Products
  3. Electrical
  4. Splices & Accessories
  5. Cold Shrink Splices
  6. 3M™ Cold Shrink QS4 Integrated Splice QS4-35TS-500-1000

3M™ Cold Shrink QS4 Integrated Splice QS4-35TS-500-1000

Part Number QS4-35TS-QCI-500-10003M ID 80611604705UPC 00051128602089
  • Inline splice for joining tape shield, wire shield, UniShield® and LC power cables
  • Special-electrode design reduces electrical stress at critical cable and splice interface
  • Designed for feeder and distribution circuits, size transition splicing, direct-burial installations and submerged locations
  • 1.24 to 2.07-in O.D. insulation
 More...
View all details
For industrial/occupational use only. Not for consumer sale or use.
Specifications
Attribute Name
Value
Cable Shielding
Longitudinally Corrugated (LC), Tape Shield, UniShield®, Wire Shield
Case Quantity
1
Conductor Sizes (Imperial)
1000 kcmil
Connector Included
QCI 500 - 1000
Insulation O.D. Range
1.24 - 2.07 Inch
Insulation O.D. Range (Metric)
31.5 - 52.6 mm
Maximum Conductor Size (Imperial)
1000 kcmil
Minimum Conductor Size (Imperial)
500 kcmil
Number of Conductors
1
Splice Type
Inline
Voltage
35 kV
Details
  • Inline splice for joining tape shield, wire shield, UniShield® and LC power cables
  • Special-electrode design reduces electrical stress at critical cable and splice interface
  • Designed for feeder and distribution circuits, size transition splicing, direct-burial installations and submerged locations
  • 1.24 to 2.07-in O.D. insulation
  • Accommodates wire size of 500 to 1000 kcmil
  • Standard joint includes braid for easy connection to ground
  • Rated for 35 kV cables
  • Withstands a temperature range of 221 to 284 degrees F (105 to 140 degrees C)
  • IEEE Approved
  • 1 kit/case

3M™ QS4-35TS Series Cold Shrink Integrated Splice Kit with a shear connector, is a 35 kV-class inline splice designed to join tape shield, wire shield, UniShield® and LC power cables. Cold shrink design fits type MV-90 or MV-105 cables with aluminum or copper conductors while ensuring easy installation. The silicone-rubber construction offers good high- and low-temperature performance.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.