1. United States
  2. All 3M Products
  3. Electrical
  4. Splices & Accessories
  5. Cold Shrink Splices
  6. 3M™ Cold Shrink QS4 Integrated Splice QS4-35JCN-QCI-1/0-350

3M™ Cold Shrink QS4 Integrated Splice QS4-35JCN-QCI-1/0-350

  • Part Number QS4-35JCN-QCI-1/0-
  • 3M ID 7100165396
  • UPC 00051128601860
Voltage 35 kV
Conductor Sizes (Imperial) 300 kcmil, 250 kcmil, 2/0 AWG, 350 kcmil, 4/0 AWG, 3/0 AWG, 1/0 AWG
Number of Conductors 1
Cable Shielding Jacketed Concentric Neutral (JCN)
Splice Type Cold Shrink
Insulation Outer Diameter (Imperial) 1.16 in, 1.4 in, 1.32 in, 1.36 in, 1.17 in, 1.19 in, 1.39 in, 1.59 in, 1.68 in, 1.7 in, 1.09 in, 1.18 in, 1.24 in, 1.14 in, 1.34 in, 1.15 in, 1.55 in, 1.6 in, 1.44 in, 1.5 in, 1.12 in, 1.25 in, 1.33 in, 1.49 in, 1.57 in, 1.26 in, 1.42 in, 1.46 in, 1.11 in, 1.51 in, 1.62 in, 1.29 in, 1.3 in, 1.43 in, 1.28 in, 1.1 in, 1.64 in, 1.31 in, 1.52 in, 1.67 in, 1.27 in, 1.35 in, 1.07 in, 1.21 in, 1.69 in, 1.13 in, 1.22 in, 1.61 in, 1.08 in, 1.63 in, 1.37 in, 1.53 in, 1.66 in, 1.58 in, 1.48 in, 1.56 in, 1.41 in, 1.54 in, 1.2 in, 1.45 in, 1.23 in, 1.47 in, 1.38 in, 1.65 in

Inline splice for joining JCN and flat strap neutral power cables

Special-electrode design reduces electrical stress at critical cable and splice interface

Designed for feeder and distribution circuits, size transition splicing, direct-burial installations and submerged locations

View more details

Details

Highlights
  • Inline splice for joining JCN and flat strap neutral power cables
  • Special-electrode design reduces electrical stress at critical cable and splice interface
  • Designed for feeder and distribution circuits, size transition splicing, direct-burial installations and submerged locations
  • Rated for 35 kV cables
  • Withstands a temperature range of 221 to 284 °F (105 to 140 °C)

The new 3M™ Cold Shrink QS4 Integrated Splice Kit is a premier offering that utilizes our field-proven 3M™ Cold Shrink QS-III Splice Body with additional features that make installation quick and easy. This exciting product integrates all of the layers of a shielded power cable splice into one compact joint.

With this splice, 3M is introducing our easy-to-use yellow core and rejacketing tube. We incorporated our smooth-edged shield sock (non-fraying ends) with optional customizable ground braid. The Jacketed Concentric Neutral (JCN) inline splice kits below are designed for joining Jacketed Concentric Neutral (JCN) and Flat Strap Neutral power cables. The splice includes an integrated 7 AWG ground braid for attaching to an external ground wire (ground braid does not extend beyond the end of the rejacketing after installation). Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.

Typical properties

Resources

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.