The Standard Abrasives™ Light Deburring Wheel finishes and deburrs parts with critical tolerances and may be used on automated equipment, straight shaft stationary and portable tools as well as feed-through machines.
Choosing High vs. Low Densities
Standard Abrasives™ Light Deburring Wheel utilizes a fine grade silicon carbide mineral. These wheels vary in density, ranging from 6 to 8. Higher density wheels tend to be more durable and have a longer service life. Lower density wheels indicate softer feel. This lower density enables the wheel to be more flexible and conform to the substrate. Light deburring wheels tend to be less aggressive and finish finer than other convolute wheels.
Smear-Resistant for A Brighter Finish
These wheels are convolute wheels, meaning they must be run in one direction as indicated by the arrow on the side of the wheel. The abrasive web, made with resin and silicon carbide mineral, is wound around the wheel's core. The silicon carbide mineral is bonded with a smear-resistant resin that will not smudge or stain the substrate. These attributes contribute to a cleaner, brighter finish on the substrate. Our Light Deburring Wheel is a great starting point for your light blending, polishing, and deburring applications. Consider it a trusted tool for achieving a fine finish on the workpiece.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.