3M™ Heat Shrink Tubing MFP is a thin wall tubing that provides a high degree of mechanical strength and high temperature resistance. This tubing has a 2:1 shrink ratio and provides flame retardant insulation for 600V rated applications. It has semi rigid, modified polyvinylidene fluoride construction that offers superior abrasion resistance and cut through properties.
3M™ Heat Shrink Tubing MFP is transparent for easy, see through inspection and identification. This flame retardant tubing is used for shrink fit protection and strain relief of wires, solder joints, terminals, as well as connections. The high expansion ratio tubing is mechanically tough, easily markable and resists cold flow. It is perfect for use in military aircraft or vehicles and jacketing components like resistors or capacitors. It withstands temperatures of 67 to 347 degrees F ( 55 to 175 degrees C). UL Listed, SAE AS23053/8, AMS 3632, CSA, OFT Certified and RoHS 2011/65/EU Compliant.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.