1. United States
  2. All 3M Products
  3. Electrical
  4. Power Cable Connectors
  5. Power Cable Terminations
  6. 3M™ Cold Shrink QS4 Integrated Splice QS4-25SP-QCI-1-250-BCA

3M™ Cold Shrink QS4 Integrated Splice QS4-25SP-QCI-1-250-BCA

Part Number QS4-25SP-QCI-1-3M ID 80611608987UPC 00051128605738
  • Inline splice for joining JCN, flat strap neutral, tape shield and LC cables
  • Special-electrode design reduces electrical stress at critical cable and splice interface
  • Designed for feeder and distribution circuits, size transition splicing, direct-burial installations and submerged locations
  • Rated for 25/28 kV applications
 More...
View all details
For industrial/occupational use only. Not for consumer sale or use.
Specifications
Attribute Name
Value
Brand
3M™
Cable Shielding
Flat Strap Neutral, Jacketed Concentric Neutral (JCN), Longitudinally Corrugated (LC), Tape Shield
Conductor Material
Aluminum, Copper
Conductor Sizes (Imperial)
1 AWG, 1/0 AWG, 2/0 AWG, 250 kcmil, 3/0 AWG, 4/0 AWG
Insulation Level
1.33, 100%, 133%
Insulation Outer Diameter (Imperial)
0.84 in, 0.85 in, 0.86 in, 0.87 in, 0.88 in, 0.89 in, 0.9 in, 0.91 in, 0.92 in, 0.93 in, 0.94 in, 0.95 in, 0.96 in, 0.97 in, 0.98 in, 0.99 in, 1 in, 1.01 in, 1.02 in, 1.03 in, 1.04 in, 1.05 in, 1.06 in, 1.07 in, 1.08 in, 1.09 in, 1.1 in, 1.11 in, 1.12 in, 1.13 in, 1.14 in, 1.15 in, 1.16 in, 1.17 in, 1.18 in, 1.19 in, 1.2 in, 1.21 in, 1.22 in, 1.23 in, 1.24 in, 1.25 in, 1.26 in, 1.27 in, 1.28 in, 1.29 in, 1.3 in, 1.31 in, 1.32 in, 1.33 in, 1.34 in, 1.35 in, 1.36 in
Number of Conductors
1
Splice Type
Cold Shrink
Voltage
25/28 kV
Details
  • Inline splice for joining JCN, flat strap neutral, tape shield and LC cables
  • Special-electrode design reduces electrical stress at critical cable and splice interface
  • Designed for feeder and distribution circuits, size transition splicing, direct-burial installations and submerged locations
  • Rated for 25/28 kV applications
  • Withstands a temperature range of 221 to 284 °F (105 to 140 °C)

The new 3M™ Cold Shrink QS4 Integrated Splice Kit is a premier offering that utilizes our field-proven 3M™ Cold Shrink QS-III Splice Body with additional features that make installation quick and easy. This exciting product integrates all of the layers of a shielded power cable splice into one compact joint.

With this splice, 3M is introducing our easy-to-use yellow core and rejacketing tube. We incorporated our smooth-edged shield sock (non-fraying ends) with optional customizable ground braid. The Shielded Power (SP) inline splice kits below are designed for joining Jacketed Concentric Neutral (JCN), Flat Strap Neutral, Tape Shield and Longitudinally Corrugated (LC) power cables. The splice includes a 4 AWG, four-foot long integrated ground braid for attaching to an external ground (factory installed ground braid extends approximately four feet beyond the end of the rejacketing after installation). Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.