1. United States
  2. All 3M Products
  3. Electronics Materials & Components
  4. Specialty Fluids
  5. Electronics Coatings
  6. 3M™ Novec™ 1908 Electronic Grade Coating, 5 kg (11 lb), 1 Bottle/Case

3M™ Novec™ 1908 Electronic Grade Coating, 5 kg (11 lb), 1 Bottle/Case

Part Number Novec 19083M ID 7100058972UPC 00051138992460
  • Designed for moisture and corrosion protection of printed circuit boards and electronic components
  • Low surface energy allows lubricating oils, silicones, photoresist solutions, etc. to bead and drain freely from coated surfaces
  • Helps provide repellency and anti-wetting properties against liquids – water, hydrocarbons, silicones, and photoresists
  • Helps protect against corrosive gases and vapors in addition to liquids
 More...
View all details
View Legal Disclaimer
Typical Properties
Attribute Name
Value
Application
Anti-stiction, Chemical Protection, Corrosion Protection, Moisture Protection, Protecting
Application Method
Brush, Dip, Selective Dispense, Spray
Brand
Novec™
Coating Location
Electronic Device Components
Coating Thickness Range (Metric)
0.8 µm - 1.3 µm
Dielectric Constant
3.2
Dielectric Strength
2000 V/mil
Dissipation Factor
0.002
Net Weight (Imperial)
11 lb
Net Weight (Metric)
5 kg
Polymer Type
Fluoroacrylate
Product Series
Novec 1908
Removability
Removable with 3M™ Novec™ Engineered Fluid 7200, Removable with 3M™ Novec™ Engineered Fluid 72DA, Removable with 3M™ Novec™ Engineered Fluid 73DE
Solids Level
8 %
Thermal Cure Time & Temperature
No Need to Cure
UV Detectable
No
Volume (Imperial)
0.75 gal
Volume (Metric)
2.84 L
Details
  • Designed for moisture and corrosion protection of printed circuit boards and electronic components
  • Low surface energy allows lubricating oils, silicones, photoresist solutions, etc. to bead and drain freely from coated surfaces
  • Helps provide repellency and anti-wetting properties against liquids – water, hydrocarbons, silicones, and photoresists
  • Helps protect against corrosive gases and vapors in addition to liquids
  • The polymer can endure up to 175°C for 24 hours and maintain repellency
  • Essentially insoluble in solvents such as heptanes, toluene & water
  • Adheres to a variety of materials (metals, glass, ceramics, polymers, composites, laminates)
  • Thermally and electrically stable with good dielectric properties
  • Easy to apply – dries quickly without the need for post-application curing
  • Designed for spray application, however can also be applied via dip or syringe dispensing methods.

3M™ Novec™ 1908 Electronic Grade Coating is a fluorinated polymer diluted in a blend of 3M™ Novec™ 7100 and 7200 Engineered Fluids, segregated hydrofluoroether solvents, providing a low viscosity, low surface tension coating solution.

Designed for moisture and corrosion protection of printed circuit boards and electronic components, it dries to an ultrathin, transparent coating with excellent hydrophobic and oleophobic properties. It does not need curing and is easy to apply. Novec 1908 coating is non-flammable, non ozone-depleting, low in toxicity, low in GWP, RoHS compliant, and VOC exempt (per U.S. EPA).

Related Items
Related Products

Legal Disclaimer

Product Disclaimer
  • See Technical Data Sheet (TDS) for proper use recommendations and Safety Data Sheet (SDS) for safety information.
  • The technical information and data shown on this page should be considered representative or typical only and should not be used for specification purposes.
  • 3M products shown on this website may not be available in all geographic regions or may not be available at this time.
  • Please contact your local sales representative to determine product availability.
  • Always practice smart and safe industrial hygiene practices. Do not spray apply without proper ventilation and/or personal protective equipment (PPE).