1. United States
  2. All 3M Products
  3. Abrasives
  4. Abrasive Discs
  5. Non-woven Discs
  6. 3M™ Finesse-it™ Refining Disc 3000, 3 in x NH, 20/Carton, 160 ea/Case

3M™ Finesse-it™ Refining Disc 3000, 3 in x NH, 20/Carton, 160 ea/Case

  • 3M ID 7100042003
  • UPC 00048011649764

Silicon carbide mineral works fast and produces a smooth finish

Versatile disc can be run wet or dry on paint, clear coat, primer, gel coat and metal

Nonwoven web is less prone to loading and helps improve the life of the disc

View more details
Frequently viewed resources
Safety Data Sheet (PDF, 0B)
Overall Diameter (Imperial) 3 in
Overall Diameter (Metric) 76.2 mm
Attachment Type Hook & Loop
Abrasive Material Silicon Carbide

Details

Highlights
  • Silicon carbide mineral works fast and produces a smooth finish
  • Versatile disc can be run wet or dry on paint, clear coat, primer, gel coat and metal
  • Nonwoven web is less prone to loading and helps improve the life of the disc
  • Flat abrasive surface works fast to refine sand scratches
  • Designed for medium to large area applications

3M™ Finesse-it™ Refining Disc 3000 features extra-fast cutting silicon carbide to quickly refine sand scratches left by previous 1200/1500 grade paint leveling steps. These versatile discs are ideal for large area refining/repair. Can be run without water in the pre-buff step.

3M™ Finesse-it™ Refining Disc 3000
Designed to Deliver Superior Finishes
Our 3M™ Finesse-it™ Refining Disc 3000 is specially coated with grade 3000 silicon carbide mineral so there is more mineral positioned to work quickly, last longer and produce a uniform finish throughout the life of the disc. Each strand on the face side of the disc is coated with mineral, ensuring the abrasive is where it can be most effective. In addition, the spaces within the web make it less prone to loading and helps improve the life of the disc. The 3M™ Finesse-it™ Refining Disc 3000 provides superior finishing for both wet and dry applications.'

Silicon Carbide Cuts Fast and Sharp
Silicon carbide mineral is very hard and fractures easily, resulting in freshly exposed sharp edges that cut extra fast and produce a smooth, professional-looking finish. Silicon carbide products are commonly used for low-pressure applications such as paint prep and finishing on wood and metal. While it wears faster than aluminum oxide, it produces a superior finish.

Learn more about 3M™ Finesse-it™ Refining Disc 3000 (PDF, 5 Mb)

Typical properties

Resources

Reviews

Large Volume Order

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.