1. United States
  2. All 3M Products
  3. Abrasives
  4. Abrasive Wheels
  5. Deburring & Finishing Wheels
  6. Standard Abrasives™ LDW Wheel 850341, 14 in x 1 in x 8 in 8S FIN, 1 ea/Case

Standard Abrasives™ LDW Wheel 850341, 14 in x 1 in x 8 in 8S FIN, 1 ea/Case

  • Part Number 850341
  • 3M ID 7100016629
  • UPC 00051115370199

Great for light deburring, blending machine and belt marks and finishing small parts

Soft density enables the abrasive to conform to the substrate, which prevents undercutting and gouging

The Light Deburring Wheel has a fast finish rate that requires less effort than competitive wheels

View more details
Frequently viewed resources
Safety Data Sheet (PDF, 0B)
Overall Diameter (Imperial) 14 in
Overall Diameter (Metric) 355.6 mm
Face Width (Metric) 25.4 mm
Face Width (Imperial) 1 in
Center Hole Diameter (Imperial) 8 in
Center Hole Diameter (Metric) 203.2 mm

Details

Highlights
  • Great for light deburring, blending machine and belt marks and finishing small parts
  • Soft density enables the abrasive to conform to the substrate, which prevents undercutting and gouging
  • The Light Deburring Wheel has a fast finish rate that requires less effort than competitive wheels
  • Wheel is non-metallic, so it won’t contaminate the work piece
  • Maintains a smear resistant finish

The Standard Abrasives™ Light Deburring Wheel finishes and deburrs parts with critical tolerances and may be used on automated equipment, straight shaft stationary and portable tools as well as feed-through machines.

 

Standard Abrasives™ Light Deburring Wheel
Ideal for light deburring of parts with critical tolerances

Choosing High vs. Low Densities
Standard Abrasives™ Light Deburring Wheel utilizes a fine grade silicon carbide mineral. These wheels vary in density, ranging from 6 to 8. Higher density wheels tend to be more durable and have a longer service life. Lower density wheels indicate softer feel. This lower density enables the wheel to be more flexible and conform to the substrate. Light deburring wheels tend to be less aggressive and finish finer than other convolute wheels.

 

 


Maintain a smear resistant, bright polished finish from part to part

Smear-Resistant for A Brighter Finish
These wheels are convolute wheels, meaning they must be run in one direction as indicated by the arrow on the side of the wheel. The abrasive web, made with resin and silicon carbide mineral, is wound around the wheel's core. The silicon carbide mineral is bonded with a smear-resistant resin that will not smudge or stain the substrate. These attributes contribute to a cleaner, brighter finish on the substrate. Our Light Deburring Wheel is a great starting point for your light blending, polishing, and deburring applications. Consider it a trusted tool for achieving a fine finish on the workpiece.

 

 

 

Typical properties

Resources

Reviews

Large Volume Order

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.