1. United States
  2. All 3M Products
  3. Tools & Equipment
  4. Holders & Back-up Pads
  5. 3M™ Disc Pad Face Plate Ribbed 81729, 9 in Hard Black, 10 ea/Case

3M™ Disc Pad Face Plate Ribbed 81729, 9 in Hard Black, 10 ea/Case

  • Part Number 81729
  • 3M ID 7000148244
  • UPC 00051144817290

Designed for use with a 3M™ Disc Pad Hub

Various flexibilities support grinding applications ranging from lightweight to heavy-duty

Plate accommodates a fiber disc of equal diameter

View more details
Overall Diameter (Imperial) 9 in
Overall Diameter (Metric) 228.6 mm
Product Type Disc Pad Face Plate
Abrasive Attachment Type Hub & Retainer Nut

Details

Highlights
  • Designed for use with a 3M™ Disc Pad Hub
  • Various flexibilities support grinding applications ranging from lightweight to heavy-duty
  • Plate accommodates a fiber disc of equal diameter
  • Plate color indicates disc density for easy identification in the workroom

3M™ Disc Pad Face Plate backs a same size fiber disc (sold separately) to provide firm support and the force required for grinding applications. It is used in conjunction with a disc pad hub (sold separately), which attaches to the power tool, and held into place along with the appropriate disc using a retainer nut (sold separately).

3M™ Disc Pad Face Plate Ribbed
This assembly allows 3M™ Disc Pad Face Plate to be easily changed without removing the disc pad hub, allowing the operator to use a single tool for multiple applications from heavy grinding to finishing a workpiece.

Some face plates have ribbing on the bottom face. Ribbed face plates provide additional force when needed for optimal fracturing of the abrasive mineral. By reducing the area of contact, or pressure per square foot (PSI), ribbed face plates increase the grinding pressure of the abrasive with the same amount of operator effort, and extend disc life when dulling is a problem.

Choose a plate with the level of firmness needed for the application—a lighter density face plate for lighter weight grinding applications, and a harder density face plate for more heavyweight grinding applications. Using the correct face plate for the application ensures that the abrasive mineral will fracture as it should, maximizing the life of the abrasive. The plate comes in one of four different colors that indicate the density so the correct plate can be easily identified in the workroom: red = extra hard (for heavy grinding with the coarsest grades), black = hard (for heavy metal removal, large welds, etc.), gray = medium (for general purpose grinding and finishing), and white = soft (for finishing operations on flat or contoured surfaces).

Typical properties

Resources

Reviews

Large Volume Order

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.