1. United States
  2. All 3M Products
  3. Electrical
  4. Power Cable Connectors
  5. Separable Connectors
  6. 3M™ 200 Amp Industrial Loadbreak Elbow5810-B-4/0, 5-8 kV

3M™ 200 Amp Industrial Loadbreak Elbow5810-B-4/0, 5-8 kV

  • Part Number 5810-B-4/0
  • 3M ID 7000132800
  • UPC 00054007047780

Ideal for connecting underground cable to transformers, switchgear and junctions that come with loadbreak bushings

Cold shrink tube seals from the bottom of the elbow to the cable jacket

Specially designed for use on tape shield, wire shield, UniShield® and jacketed concentric neutral types of cables

View more details
Frequently viewed resources
Tech Data Sheet (PDF, 489KB)Safety Data Sheet (PDF, 0B)
Conductor Sizes (Imperial) 250 kcmil, 4/0 AWG
Insulation Diameter Range 0.700-0.910 in
Maximum Operating Voltage 8 kV
Insulation Diameter Range (Metric) 17.8-23.1 mm
Maximum Insulation Outer Diameter (Imperial) 0.91 in
Cable Voltage Rating 15 kV

Details

Highlights
  • Ideal for connecting underground cable to transformers, switchgear and junctions that come with loadbreak bushings
  • Cold shrink tube seals from the bottom of the elbow to the cable jacket
  • Specially designed for use on tape shield, wire shield, UniShield® and jacketed concentric neutral types of cables
  • High-quality, peroxide-cured EPDM provides better insulation
  • Meets ANSI/IEEE Standard 386

3M™ 5810 Series Industrial Loadbreak Elbow Kit is a fully shielded and insulated dead front termination. This kit is for connecting underground cable to transformers, switchgear and junctions that come with loadbreak bushings. It is designed for use on tape shield, wire shield, UniShield® and JCN types of cables. The elbow is peroxide cured EPDM.

3M™ 5810 Series Industrial Loadbreak Elbow Kit includes an elbow body, loadbreak probe, probe installation tool, silicone lubricant, cold shrink jacketing tube, mastic strips, ground braid assembly, constant force spring and CC 3 cable cleaning pads. This kit is rated for 5 to 15 kV, 200 amp applications. Meets ANSI/IEEE Standard 386.

Typical properties

Resources

Manufacturing Origin: USA

The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.

Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.