3M™ Disc Retainer Nut 02618, 5/16 in x 5/8-11 Internal, 10 per case

Part Number 02618, 3M ID 60980038180, UPC 00051111510476

1 of 2

Hover to zoom

Securely fasten fiber discs to a grinder or sander spindles
Compatible with 3M™ Disc Pad Hubs and face plates or any fiber disc holders with 5/8-11 or M14-2 threaded spindles
Tighten using a 1-1/4 inch spanner wrench with 1/4 inch pins (sold separately)
Different disc retainer nut lengths are available to attach 3M™ disc pad hubs, disc pad face plates, and fibre discs

View all details

For industrial/occupational use only. Not for consumer sale or use.

Specifications

Attribute Name	Value
Alternative Sale Availability	6. This item is for industrial use only and there are no VOC restrictions.
Application	Deburring, Finishing, Polishing, Surface Preparation
Brand	3M™
CA Metalworking Solutions Level 2	Abrasive Tools and Accessories
Converted Form	Power Tool Accessory
Equipment - Machines	Disc Sanders, Right Angle Grinders
Function/Attachment Style	Mechanical Attachment
Industries	Marine, Metalworking
Market	Facilities Management
Overall Height (Imperial)	12.7 in
Overall Height (Metric)	32.26 cm
Overall Length (Imperial)	1 in
Overall Length (Metric)	2.54 cm
Overall Width (Imperial)	3 in
Overall Width (Metric)	7.62 cm
Product Form	Nut
Segment	Maintenance
Thread Size	5/8-11 INT
Type	Retainer Nut

Details

Securely fasten fiber discs to a grinder or sander spindles
Compatible with 3M™ Disc Pad Hubs and face plates or any fiber disc holders with 5/8-11 or M14-2 threaded spindles
Tighten using a 1-1/4 inch spanner wrench with 1/4 inch pins (sold separately)
Different disc retainer nut lengths are available to attach 3M™ disc pad hubs, disc pad face plates, and fibre discs

3M™ Disc Retainer Nut securely fastens a fiber disc to a disc pad hub or face plate for use with a rotary power tool. This nut is made to fit 3M disc hubs and face plates, but also fits fiber disc holders from other manufacturers.

After placing the disc pad hub, disc pad face plate, and fibre disc onto the tool, the final step to secure these items is to tighten the 3M™ Disc Retainer Nut.

Different disc retainer nut lengths are available to attach 3M™ disc pad hubs

Easy to Use
After placing the disc pad hub, disc pad face plate, and fibre disc onto the tool, the final step to secure these items is to tighten the 3M™ Disc Retainer Nut. Use a 1-1/4 inch spanner wrench with 1/4 inch pins to tighten the disc retainer nut on the spindle. Most spanner wrenches provided with pneumatic or electric tools will fit 3M™ Disc Retainer Nuts. Also available separately from 3M™, PN 06544 is an adjustable spanner wrench, which can be used to tighten 3M™ Disc Retainer Nuts.

Learn more about Metalworking solutions (PDF, 13 Mb)

Find 3M™ Power Tools, Abrasives and Accessories (PDF, 18.5 Mb)

Resources

Catalogs

Safety Data Sheets

3M™ Power Tools, Spare Parts - Zinc Alloy: Regulators, Speed Control, Vacuum Retainers (PDF)

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.