3M™ Scotchcast™ Resin 235 is a 2 part, oven curing, semi flexible, unfilled, epoxy based, liquid resin. Resin with low viscosity and good wetting characteristics is formulated for complete impregnation of small coils. This resin is suitable for a variety of general purpose applications.
3M™ Scotchcast™ Electrical Resin 235 has good wetting and low viscosity properties. Resin has permanent semi flexibility, thermal shock and impact resistance, good electrical and adhesion properties. This resin has the mechanical strength and flexibility required for high quality insulation of large castings including motors, transformers and coils. MIL I 16923E Certified and RoHS 2011/65/EU Compliant.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.