3M™ Silicone Lubricant
- 3M ID B49000245
Details
Highlights
- High quality silicone lubricant works for many applications
- Lubricant eliminates rubber squeaks and prevents sticking
- Formula contains no petroleum oils to stain fabrics
- Cold hardy formula will not freeze at -28°F
- Heat resistant formula will not degrade at 350°F
3M™ Silicone Lubricant eliminates rubber squeaks, prevents sticking and seals out moisture. This lubricant contains no petroleum oils to stain fabrics. Formulated for extreme conditions, it will not freeze at -28°F nor degrade at 350°F. Silicone lubricant is available in both wet and dry formulas.
Wet type formula — Part Number 08877
Dry type formula — Part Number 08897
3M™ Silicone Lubricant delivers the versatility to work in many applications. Use our product for lubricating moving parts; eliminating squeaks caused by friction; protecting against rust and corrosion; sealing out moisture; preventing buildup of glues, waxes, inks and paints; preserving plastics, rubber and leather; and prolonging the life of cutting tools.
Resists the Extremes of Hot and Cold
Our silicone lubricant handles the extremes of temperature ranges, making it a perfect choice for automotive applications where conditions can be harsh. The lubricant resists freezing down to -28°F and will not degrade at temperatures as high as 350°F. You can rely on our lubricant delivering high performance in frigid cold days of winter and blistering hot days of summer.
- Turn spray tip so opening points to dot on rim of can.
- Hold can upright and push actuator on top of can all the way down to apply a uniform spray. Position the actuator away from your face before spraying.
- If using the extension tube, insert it in to the actuator using a twisting motion.
- Best results are obtained when material is at room temperature. Higher temperatures increase the pressure in the can, and lower temperatures reduce the pressure.
- Hold can 8" to 10" from surface to be sprayed. Apply evenly and use sparingly.
- For hard to reach or small surfaces, use the extension tube.
- On rubber, leather, and vinyl; apply and wipe with a cloth.
Applications for Wet Formula (PDF, 22.66 Kb)
- Lubricates doors, "T" tops, sunroofs, hatchbacks and trunk weather-stripping
- Protects rubber parts
- Preserves plastic and vinyl surfaces
- Seals out moisture
Applications for Dry Formula (PDF, 22.66 Kb)
- Lubricates plastic dash parts
- Protects door weather strips
- Provides window channel lubrication
- Lubricates door locks
Reviews
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
