3M™ DBI-SALA® Railok 90™ Angle Iron Clamp 6000132, 1 EA

3M Product Number 6000132, 3M ID 70007474367

Discontinued

1 of 2

Hover to zoom

Offset angle iron clamp attaches rail to structure - 1 every 5 ft. (1.5 m) required
Bolt and clamp installation fits angle iron 1-1/2" to 4-1/8" (3.8 to 10.5 cm) wide up to 5/8" (1.6 cm) thick
Brackets available to fit other angle iron sizes
Aluminum and galvanized construction

View all details

For industrial/occupational use only. Not for consumer sale or use.

Specifications

Attribute Name	Value
Attachment Type	Clamp-On
Brand	DBI-SALA®
Case Quantity	1
Connected Safety ID Equipped	No
Dimensions	(8.00x10.50x2.00)in
Install Type	Permanent
Product Type	Angle Iron Clamp
Recommended Industry	General Industrial, Oil & Gas, Utilities, Wind Energy
Specifications Met	ANSI A14.3-1992, FAA RR-S-001301, OSHA 1910.27
Structure Type	Tower/Lattice
Weight (Imperial)	6.7 lb.
Weight Capacity	130-310 lbs. (59-141kg)

Details

Offset angle iron clamp attaches rail to structure - 1 every 5 ft. (1.5 m) required
Bolt and clamp installation fits angle iron 1-1/2" to 4-1/8" (3.8 to 10.5 cm) wide up to 5/8" (1.6 cm) thick
Brackets available to fit other angle iron sizes
Aluminum and galvanized construction
Durable fastening hardware included
Customizable to suit almost any application
Order top and bottom rail gate, rail, joint and shuttle separately

Offset angle iron clamp with fasteners, fits 1-1/2" to 4-1/8" (3.8 to 10.5 cm) wide up to 5/8" (1.6 cm) thick, 1 required every 5 ft. (1.5 m).

The Railok 90^™ rigid rail system consists of top and bottom entry/exit gates, rail joints, and multiple mounting bracket options designed to mount the rigid aluminum rail to the structure. A Railok 90^™ shuttle connects the worker to the system and automatically follows the user for hands free climbing, and locks onto the rail in the event of a fall, allowing the user to regain their footing. Designed for ease of use and versatility, you can configure to an existing ladder or customize a system with integrated ladder pegs when no ladder exists. Various clamps are available to attach to almost any structure.

Resources

Brochures

Railok 90™ Ladder Safety System Brochure - English (PDF, 1.4MB)

Data Sheets

Instructions

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

Product Support

Specific product and application questions

Product Support1-800-328-6146