1. United States
  2. All 3M Products
  3. Filtration & Separation
  4. Liquid Filtration Components
  5. Gaskets & Seals
  6. 3M™ Liqui-Cel™ K206 LIQUICEL 10X28 V-BAND SS SEAL KIT

3M™ Liqui-Cel™ K206 LIQUICEL 10X28 V-BAND SS SEAL KIT

Part Number K2063M ID 70201353219UPC 000511158506913M Product Number K206
    • Helps ensure proper sealing of membrane contactor components
    • Using recommended parts helps to prevent leaking and low performance
    • Seal kit components and materials vary
    • Ensure that the right kit is ordered for the membrane contactor and cartridge being serviced
     More...
    View all details
    Specifications
    Attribute Name
    Value
    Brand
    Liqui-Cel™
    Filter Technology
    Membrane
    Filter Type
    Gas Exchange
    Industries
    Industrial
    Units per Case
    1
    Product Details
    • Helps ensure proper sealing of membrane contactor components
    • Using recommended parts helps to prevent leaking and low performance
    • Seal kit components and materials vary
    • Ensure that the right kit is ordered for the membrane contactor and cartridge being serviced
    • Consult your 3M sales representative for assistance

    Seal Kits for use with 3M™ Liqui-Cel™ Membrane Contactors contain the recommended parts for properly sealing the membrane contactor components. Using recommended replacement parts during cartridge change-outs helps ensure the right fit to help prevent leaks or poor performance. Seal kits are available for most membrane contactors that are designed with replaceable cartridges.

    Seal Kits for use with 3M™ Liqui-Cel™ Membrane Contactors contain the recommended parts for properly sealing the membrane contactor components. Using recommended replacement parts during cartridge change-outs helps ensure the right fit to help prevent leaks or poor performance. Seal kits are available for most membrane contactors that are designed with replaceable cartridges.

    Included in Kit*

    • Gaskets and/or o-rings to seal membrane contactor components
    • Center seals, lock rings and/or seal washers (if applicable for product)


    * Cartridges, tools and other parts, if required, are sold separately.

    * Seal kit components and materials vary. Ensure that the right seal kit is ordered for the membrane contactor and cartridge being serviced. Please check with your 3M representative if you need assistance with seal kit availability and proper selection.

    About 3M™ Liqui-Cel™ Membrane Contactors
    3M™ Liqui-Cel™ Membrane Contactors provide efficient dissolved gas control in a compact design. Capable of adding gases to or removing dissolved gases from compatible liquid streams, these gas transfer devices utilize hollow fiber membrane technology that may help facilities around the world improve operating efficiency, performance and protect product quality.

    The presence of dissolved gases, such as oxygen, carbon dioxide, nitrogen and other non-condensable gases can cause a number of difficulties. Process interruptions, yield loss, corrosion, surface defects, unreliable measurement readings, poor product quality, higher operating costs and equipment inefficiency are a few examples of challenges faced by various industries when dissolved gases and air bubbles are not consistently controlled.

    The 3M™ Liqui-Cel™ Membrane Contactor product offering includes products made with various materials of construction and a wide-range of flow capacities to meet process and application requirements. Their modular nature makes them easy to incorporate into systems with lower weight and less space than other conventional technologies, such as vacuum towers or forced draft deaerators. 3M™ Liqui-Cel™ Membrane Contactors do not require chemicals in operation and can be an effective alternative to chemical treatment options, such as oxygen scavengers in boiler feedwater or caustic/acid in reverse osmosis (RO) and other deionization systems. This may be particularly advantageous for facilities that want to reduce on-site chemical use as part of their sustainability goals.

    How 3M™ Liqui-Cel™ Membrane Contactors Membrane Contactors Work
    3M™ Liqui-Cel™ Membrane Contactors utilize microporous or non-porous, semi permeable hollow fiber membrane that is placed inside a contactor housing. In the EXF, SP, and MM-0.5x1 and MM-0.75x1 series membrane contactors, liquid flows around the outside of the hollow fiber membrane while a vacuum and/or sweep gas is applied to the inside of the hollow fiber during operation. In other MM series membrane contactors liquid and gas flows are opposite: liquid flows inside of the hollow fiber membrane while a vacuum and/or sweep gas is applied to the outside of the hollow fiber.

    Applying a vacuum or sweep gas creates a difference in the gas concentration levels between the inside (lumenside) and outside (shellside) of the hollow fiber membrane. This concentration difference is what drives rapid and efficient dissolved gas transfer.