3M™ Scotchlite™ Reflective Material 8786 Fluorescent Red-Orange Transfer
Film, Config Roll
Configurable
Yes
Close
Specifications
Attribute Name
Value
Adhesive
Heat Activated Polyester
Attachment Type
Heat Transfer
Backing
Heat Activated Polyester
Brand
Scotchlite™
Certified Performance Required
None
Configurable
No, Yes
Custom Product Size Availability
Yes
Daytime Color
Fluorescent Red-Orange
Dry-Cleaning Cycles at ANSI Certified Standards
0
Flame Resistant
No
Initial Average RA
175
Overall Length (Imperial)
109.36 yd, 54.68 yd
Overall Length (Metric)
100 m, 50 m
Overall Width (Imperial)
1 in, 2 in, 36 in, 48 in
Overall Width (Metric)
1220 mm, 25.4 mm, 50.8 mm, 914.4 mm
Recommended Industry
Utilities
Size (Imperial)
1 in x 109.36 yd, 2 in x 109.36 yd, 36 in x 54.68 yd, 48 in x 54.68 yd
Size (Metric)
1220 mm x 50 m, 25.4 mm x 100 m, 50.8 mm x 100 m, 914.4 mm x 50 m
Technology
Beaded
Wash Method
Not Washable
Details
3M™ Scotchlite™ Reflective Material is designed for enhancing visibility in low light and nighttime conditions
Fluorescent properties help to make material highly visible in daylight, dawn and dusk
Heat transfer application
Fluorescent red-orange
This fluorescent red-orange transfer film is composed of wide angle, exposed retroreflective lenses bonded to a heat activated adhesive.
This product is not certified to a specific standard for occupational workwear in the United States, but may conform to standards in other parts of the world.
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.