1. United States
  2. All 3M Products
  3. Electrical
  4. Crimp Terminals
  5. Quick Disconnects
  6. 3M™ Scotchlok™ Male Disconnect, Non-Insulated Butted Seam MU10-250DMK, 12-10 AWG, 500/Case

3M™ Scotchlok™ Male Disconnect, Non-Insulated Butted Seam MU10-250DMK, 12-10 AWG, 500/Case

Part Number MU10-250DMK3M ID 80610050454UPC 00054007020561
  • Non-insulated, butted-seam barrel with a beveled mouth offers easy insertion of wires
  • This male disconnect terminal offers excellent holding force
  • Allows for quick and easy disconnect of wires
  • Mates with 0.25-in wide female tab
 More...
View all details
For industrial/occupational use only. Not for consumer sale or use.
Specifications
Attribute Name
Value
Barrel Length (Imperial)
0.25 Inch
Barrel Style
Butted
Brand
Scotchlok™
Connection Width (Imperial)
0.25 in
Connection Width (Metric)
6.35 mm
Disconnect Type
Male
Fastener Orientation
Male
Insulation Material
Non-Insulated
Male Tab Width (W')
0.25 Inch
Maximum Conductor Size (Imperial)
10 AWG
Minimum Conductor Size (Imperial)
12 AWG
Overall Length (Imperial)
0.75 in
Packaging
500 per bulk box
Pad Width
0.25 in
Solution for
Wireless Network: Infrastructure Accessories
Tab Width
0.250
Terminal Style
Standard
Terminal Type
Standard
Units per Case
500
Details
  • Non-insulated, butted-seam barrel with a beveled mouth offers easy insertion of wires
  • This male disconnect terminal offers excellent holding force
  • Allows for quick and easy disconnect of wires
  • Mates with 0.25-in wide female tab
  • Accommodates wire sizes 12 to 10 AWG
  • Made of electrolytic copper for good conductivity and has corrosion-resistant tin plating
  • Withstands a maximum temperature of 347 degrees F (175 degrees C) for bare terminals
  • Rated 600V for building wire and 1000V for signs, fixtures or luminaires
  • UL Listed, CSA Certified and RoHS 2011/65/EU Compliant
  • 500/case

3M™ Scotchlok™ Standard Male Disconnect Terminal offers superior holding force while allowing for quick and easy disconnect. The terminal has a non-insulated, butted-seam barrel and withstands a maximum temperature of 347 degrees F (175 degrees C). Its electrolytic copper construction offers good conductivity and a tin-plated finish resists corrosion.

3M™ Scotchlok™ Standard Male Disconnect Terminal attaches to the mating part with a tongue that slips over the female tab. It has a non-insulated, butted-seam barrel and a beveled mouth to easily guide the wire into position. UL Listed, CSA Certified and RoHS 2011/65/EU Compliant.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.