1. United States
  2. All 3M Products
  3. Electrical
  4. Crimp Terminals
  5. Fork Terminals
  6. 3M™ Scotchlok™ Locking Fork, Non-Insulated Brazed Seam M14-6FLK, Stud Size 6, 1000/Case

3M™ Scotchlok™ Locking Fork, Non-Insulated Brazed Seam M14-6FLK, Stud Size 6, 1000/Case

  • Part Number M14-6FLK
  • 3M ID 7100164207
  • UPC 00054007137757
Stud Diameter (Imperial) 0.138 in
Stud Diameter (Metric) 3.505 mm
Insulation Material Non-insulated
Maximum Conductor Size (Imperial) 14 AWG
Minimum Conductor Size (Imperial) 16 AWG

Non-insulated, brazed-seam barrel ensures a secure fit and offers reliable performance

Beveled mouth offers easy insertion of wires

Spring-like tongue firmly fits around the stud

View more details
Frequently viewed resources
PDF (1) Copy 26Tech Data Sheet (PDF, 20KB)

Details

Highlights
  • Non-insulated, brazed-seam barrel ensures a secure fit and offers reliable performance
  • Beveled mouth offers easy insertion of wires
  • Spring-like tongue firmly fits around the stud
  • Electrolytic copper construction offers good conductivity
  • Withstands a maximum temperature of 347 degrees F (175 degrees C) for bare terminals
  • 600V-rated for building wire and 1000V for signs, fixtures or luminaires
  • UL Listed, CSA Certified and RoHS 2011/65/EU Compliant

3M™ Scotchlok™ Locking Fork is a lug connection terminal that has a spring-like tongue to securely lock around the stud. The non-insulated, brazed-seam barrel has a beveled mouth that guides the wire into position, and it withstands a maximum temperature of 347 degrees F (175 degrees C). Electrolytic copper construction offers good conductivity and a tin-plated finish resists corrosion.

3M™ Scotchlok™ Locking Fork Terminal has a non-insulated, silver brazed-seam barrel with a beveled mouth that guides the wire into position and withstands crimping pressures or operating stresses. UL Listed, CSA Certified and RoHS 2011/65/EU Compliant.

Typical properties

Resources

Contact a Sales Rep

Similar products

Stud Diameter (Imperial) 0.138 in
Stud Diameter (Metric) 3.505 mm
Insulation Material Non-insulated
Maximum Conductor Size (Imperial) 14 AWG
Minimum Conductor Size (Imperial) 16 AWG
For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.