Attribute Name
|
Value
|
---|---|
Breakout Boot
|
No
|
Cable Insulation Outside Diameter Range
|
1.15-1.98 in
|
Cable Insulation Outside Diameter Range (Metric)
|
29,2-50,3 mm
|
Cable Shielding
|
Tape Shield, UniShield®, Wire Shield
|
Compatible Lug
|
QL2-A-350-750, QL2-A-4/0-600, QL2-A-500-1000
|
Conductor Sizes (Imperial)
|
1000 kcmil, 500 kcmil, 600 kcmil, 700 kcmil, 750 kcmil, 800 kcmil, 900 kcmil
|
Family
|
QT-III
|
Indoor/Outdoor
|
Outdoor Skirted
|
Insulation Level
|
100%, 133%
|
Insulation Outer Diameter (Imperial)
|
1.16 in, 1.17 in, 1.18 in, 1.19 in, 1.2 in, 1.21 in, 1.22 in, 1.23 in, 1.24 in, 1.25 in, 1.26 in, 1.27 in, 1.28 in, 1.29 in, 1.3 in, 1.31 in, 1.32 in, 1.33 in, 1.34 in, 1.35 in, 1.36 in, 1.37 in, 1.38 in, 1.39 in, 1.4 in, 1.41 in, 1.42 in, 1.43 in, 1.44 in, 1.45 in, 1.46 in, 1.47 in, 1.48 in, 1.49 in, 1.5 in, 1.51 in, 1.52 in, 1.53 in, 1.54 in, 1.55 in, 1.56 in, 1.57 in, 1.58 in, 1.59 in, 1.6 in, 1.61 in, 1.62 in, 1.63 in, 1.64 in, 1.65 in, 1.66 in, 1.67 in, 1.68 in, 1.69 in, 1.7 in, 1.71 in, 1.72 in, 1.73 in, 1.74 in, 1.75 in, 1.76 in, 1.77 in, 1.78 in, 1.79 in, 1.8 in, 1.81 in, 1.82 in, 1.83 in, 1.84 in, 1.85 in, 1.86 in, 1.87 in, 1.88 in, 1.89 in, 1.9 in, 1.91 in, 1.92 in, 1.93 in, 1.94 in, 1.95 in, 1.96 in, 1.97 in, 1.98 in
|
Insulation Rejacketing
|
No
|
Number of Conductors
|
1
|
Number of Skirts
|
4
|
Product Series
|
7690-S
|
Product Technology
|
Cold Shrink
|
TDS Required
|
Yes
|
Voltage
|
15 kV, 25/28 kV
|
3M™ Cold Shrink QT-III 7620-S, 7680-S & 7690-S Series Termination Kits include three 1-piece, skirted terminations. Each kit has materials to make 3-single phase terminations for tape shield, wire shield and UniShield® power cables.
3M™ Cold Shrink QT-III 7620-S, 7680-S & 7690-S Series Termination Kits are designed for terminating solid dielectric shielded, medium-voltage power cables. The QT-III termination uses high dielectric constant (High-K) stress control mastic insulated with a molded UV-stable, track-resistant, silicone insulator. The track resistant, hydrophobic propertities of the silicone rubber minimize leakage currents. Meets the requirements of IEEE Standard 48, for Class 1 for outdoor, weather-exposed environments.