1. United States
  2. All 3M Products
  3. Electrical
  4. Splices & Accessories
  5. Cold Shrink Splices
  6. 3M™ Cold Shrink Splice Kit QS2012T-350, Tape, Wire, Unishield, 15 kV, Poly/EPR; Paper Insulated Lead Covered (PILC), 1 per case

3M™ Cold Shrink Splice Kit QS2012T-350, Tape, Wire, Unishield, 15 kV, Poly/EPR; Paper Insulated Lead Covered (PILC), 1 per case

Part Number QS2012T-3503M ID 80610831127UPC 00054007414940
  • Oil stop tubes provide rejacketing and moisture-seal protection to the splice
  • Resists water and eliminate the need of sweat lead
  • Designed for PILC transition to the poly/EPR cable
  • 0.88 to 1.36-in O.D. insulation
 More...
View all details
For industrial/occupational use only. Not for consumer sale or use.
Specifications
Attribute Name
Value
Cable Shielding
PILC
Connector O.D. Range
0.90 - 1.30 Inch
Connector O.D. Range (Metric)
23 - 51 mm
Maximum Connector Length
5.2 inch (Al), 5.5 inch (Cu)
Maximum Connector Length (Metric)
132 mm (Al), 140 mm (Cu)
Number of Conductors
1
PILC Cable Conductor Sizes
350 kcmil
PILC Cable Insulation O.D. Range
0.74 - 1.17 Inch
PILC Cable Insulation O.D. Range (Metric)
18.8 - 29.7 mm
Poly/EPR Cable Conductor Sizes
350 kcmil
Poly/EPR Cable Insulation O.D. Range
0.88 - 1.36 Inch
Poly/EPR Cable Insulation O.D. Range (Metric)
22.0 - 34.6 mm
Splice Type
PILC Transition
Voltage
15 kV
Details
  • Oil stop tubes provide rejacketing and moisture-seal protection to the splice
  • Resists water and eliminate the need of sweat lead
  • Designed for PILC transition to the poly/EPR cable
  • 0.88 to 1.36-in O.D. insulation
  • Accommodates wire size of 350 kcmil
  • Rated for 15 kV applications
  • Maintains resiliency and pressure even after years of aging and exposure
  • Includes a cold shrink splice body, ground braids, Scotch® 13 semi-conducting tape, Scotch 23 rubber tape, Scotch 2228 rubber mastic tape and more
  • IEEE Approved
  • 1 kit/case

3M™ QS-2000T Series Cold Shrink Inline Transition Splice Kit is designed to splice PILC cable to poly/EPR cable. The kit is rated for 15 kV voltage applications.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.