3M™ PELTOR™ Earmuffs X1P5E, Forestry Orange, 10 EA/Case
- 3M Product Number X1P5E-OR
- 3M ID 7100097447
- UPC 10078371671171
Details
Highlights
- Electrically insulated: Appropriate for a wide range of applications*
- Forestry Orange Color: Aligns with industry standard coloring
- High-performance arms: Balance durability and flexibility
- Easy click in/ click out: Move cups on and off ears easily
- Convenient storage: Store with cups clicked in or out
- Compatibility with hard hats: Designed for use with a standard hard hat slot**
- Fit can be confirmed: Verify with 3M™ E-A-Rfit™ Dual-Ear Validation System***
- X1 Products are slim and leightweight: Comfortable for wearers, especially with other protective equipment
- *These earmuff cups are made of non-conductive (sometimes referred to as “dielectric”) material while the metal components of the headbands and the helmet attachment mechanisms are covered in non-conductive material. This product was found to be electrically insulated, withstanding a voltage up to 1.2 kV, at an external laboratory against a modified test method based on EN 397:2012 under dry conditions. The user must determine the overall suitability of this product for the intended application taking into account any hazards other than noise for which this product is tested and approved. **This product was designed and tested with a 3M Hard Hat H700. For information on other hard hat models contact 3M. ***3M strongly recommends fit testing of hearing protectors. Research suggests that many users will receive less noise reduction than indicated by the NRR due to variation in earmuff fit, earmuff fitting skill and motivation of the user. If NRR is used, 3M recommends that it be reduced by 50% or in accordance with applicable regulations
3M™ PELTOR™ Earmuffs X1P5E Forestry Orange are lightweight, low- profile, helemt attach earmuffs that protect against low-level industrial noise and other loud sounds with orange coloring to improve visibility.
- NRR 21 dB; Appropriate for low level noise environments
- Forestry Orange Coloring; Good for use in forestry and landscaping segments
- Low-profile cup design; Improved compatibility with other personal protection equipment
- Optimized for use with hard hats rated for electrical insulation; Great for verticals such as Utilities, Mining, O&G and Electrical Contractors
- Good headband force and consistent attenuation after extended wear; Attachment System holds up as well as P3E, even after thousands of uses
- Arms maintain proper shape when clicking in/out
- Simple and quick movement to get ear cup on and off the ear
- Flexibility to store in convenient position
- Most users will not need to change hard hats if purchasing a P5 product
Typical properties
Resources
Reviews
Related Products
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. If this product is being purchased for use in firefighting duties, please review this Notice Regarding Fluorinated Organic Compounds.
