3M™ Air Barrier with Permeable Backing 3015VP, White, 30 in x 75 ft, 1 Roll/Case
- 3M Product Number 3015VP
- 3M ID 7100093404
- UPC 00076308983475
Details
Highlights
- Reverse-wound rolls allow for faster installation
- No primer required on most common construction materials
- Rain and wind resistant; permeable to water vapor
- Apply at surface temperatures as low as 0°F (-18°C) or as high as 150°F (66°C)
- Thicker proprietary pattern coated adhesive seals firmly while exceeding vapor permeability standards
- Membrane self-seals if penetrated, surrounding nails and staples to further reduce moisture intrusion
- Lighter weight rolls than comparable competitor products
3M™ Air Barrier with Permeable Backing 3015VP is a self-adhered vapor permeable, wind and water resistant membrane with an aggressive acrylic adhesive and a breathable film. Primer is not required on most construction surfaces. This reverse-wound roll allows for longer roll lengths, increasing contractor productivity.
- Building construction
- Climate control
3M™ Air Barrier with Permeable Backing (PDF, 207.2 Kb) 3015VP works in varied climates, which permits an extended application surface temperature range between 0°F (-18°C) and 150°F (66°C) and a service temperature range from -40°F (-40°C) to 240°F (116°C). It self-seals if penetrated, quickly closing around nails and staples to further reduce moisture intrusion. Use this material to help prevent moisture condensation by keeping the air temperature curve higher than the dew point throughout the wall.
Stops Air Leakage, Protects Air Quality and Guards Against Moisture Ingress
Using the most advanced barrier technology, the 3M™ Air Barrier with Permeable Backing 3015VP was developed through expertise in all areas of building science and indoor climate control. It was engineered to provide exacting control over moisture, air and vapor. The membrane stops air leakage, protects air quality and guards against moisture ingress.
UV resistant up to 12 months, this innovative system also brings unprecedented cost efficiency. A one-step membrane means higher productivity. The membrane allows for easy application, with no need for priming, saving installation time and labor costs. Lightweight and easy to use, a standard 30” roll of 3M™ Air Barrier with Permeable Backing 3015VP weighs 26 pounds, yet it outperforms thicker, competitive membranes weighing up to two times more.
Typical properties
Resources
Large Volume Order
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
