3M™ Scotch-Weld™ Epoxy Adhesive 125, Gray, Part A, 5 Gallon (Pail), Drum
- 3M Product Number DP125
- 3M ID 7100084588
- UPC 00021200872181,50021200872186
Details
Highlights
- BONDS A VARIETY OF SUBSTRATES: Bonds metal, various plastics, ceramics, stone and dissimilar surfaces where coefficients of thermal expansion are a consideration
- MULTIPLE APPLICATIONS AND MARKETS: Can be used in joining, gluing and structural bonding in appliance, general industrial, transportation and signage segments, as well as a host of other applications
- ENHANCED VIBRATION RESISTANCE: Flexible when cured, this epoxy is excellent for bonding dissimilar surfaces where resistance to flexing, vibration and other stresses is needed
- THERMAL EXPANSION TOLERANT: Maintains a strong bond under expansion, contraction and limited movement
- CONTROLLED FLOW: Medium viscosity helps minimize running, dripping and migration
- QUICK SET TIME: Features a 25 minute working time, reaching handling strength in approximately 150 minutes at room temperature
- CERTIFICATIONS: DP125 is UL 94 HB Certified
- FREE TO USE: Try the new 3M™ Scotch-Weld™ Digital Dispensing Assistant and experience shorter machine setup time with a free new automation tool for time-pressure systems
3M™ Scotch-Weld Epoxy Adhesive DP125 Gray is a low odor, two-part epoxy that creates strong structural and flexible bonds on metal, ceramics, wood and many plastics. It provides the reliability and strength you need to maintain productive, cost effective results.
3M™ Scotch-Weld™ Digital Dispensing Assistant
Get improved adhesive processing results when using Time-Pressure Dispensing Equipment. Be confident you’re dispensing the right amount of adhesive to reduce waste and rework. Temperatures affect adhesive flow rates and disrupt repeatable processing which can lead to poor bonding outcomes. Calibrating time-pressure dispensing systems every time the temperature changes can be a lengthy process. The 3M™ Scotch-Weld™ Digital Dispensing Assistant uses extensive laboratory testing data and 3M materials science expertise to make it easy to predict the recommended pressure setting. It is free to use and accounts for variables such as temperature, aging and lot control. After a simple, guided dispenser calibration, just enter the lot code information from the adhesive cartridge as well as the current temperature and desired flow rate. The Digital Dispensing Assistant will recommend the ideal pressure setting.
Click here for more information.Typical properties
Resources
Reviews
Large Volume Order
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
