3M™ Clean Sanding Soft Interface Disc Pad 28321, 5 in x 1/2 in 44 Holes, 10 ea/Case
- Part Number 28321
- 3M ID 7100009658
- UPC 00051141283210
Details
Highlights
- 3M™ Soft Interface Disc Pad provides extra cushion for coated and non-woven abrasive discs to prevent gouging and marring
- Soft density foam responds to contours and edges
- Designed with 3M™ Clean Sanding hole pattern to help with dust extraction and minimize loading
- Hookit™ attachment systems help expedite swapping out of discs during multi-step sequences
3M™ Soft Interface Disc Pad is constructed of ½ inch soft density foam with a 3M™ Clean Sanding hole pattern to allow dust extraction and minimize loading during sanding. The soft foam construction enables the pad to conform to edges and contours, making it a good match for sensitive workpieces where gouging and marring is a top concern.
Carefully-matched accessories work together with 3M™ Clean Sanding Products to improve productivity while delivering faster, more consistent finishing
3M™ Soft Interface Disc Pad provides a greater cushion and more conformability than a pad with medium density foam. Use this pad to reduce edge cutting when the pad is tipped on edge and maintain closer contact with the edge while maximizing dust extraction. The pad contains a series of uniquely designed holes which match those in 3M™ Clean Sand Back Up Pads, allowing sanding dust to be pulled through the holes and away from the sanding surface. This improves the work environment and prolongs disc life.
Easy Attachment
The Soft Interface Disc Pad has two sides. One side features loop material, which attaches to the back up pad used on the sanding tool. The opposite side contains hook material, which attaches to the Hookit™ sanding disc of choice.
Altogether, our 3M™ Soft Interface Disc Pad is ideal for operators who seek an added level of conformability for their sanding projects. The responsive foam design, attachment system and Clean Sanding hole pattern combine to cushion the workpiece, minimize dust and — ultimately — get the job done.
3M™ Abrasive Systems Clean Sanding Discs and Sheets (PDF, 4.71 Mb)
Typical properties
Resources
Reviews
Large Volume Order
Related Products
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
