3M™ Fastbond™ Blue Glue 4224NF, Blue, 5 Gallon Drum (Pail)
- 3M Product Number 4224NF
- 3M ID 7000121374
- UPC 00021200211591,50021200211596
Specifications
Details
Highlights
- Bonds most flooring materials, including vinyl, foam and carpet tiles
- Creates a reliable, high temperature resistant bond
- Non-flammable in its wet state
- Possesses a low odor when compared to solvents
- Adhesive can be applied by spray, brush or roller
- Also known as “blue glue”
- This is the blue version of the product
3M™ Fastbond™ Pressure Sensitive Adhesive 422NF Blue is a low-odor, water-based, adhesive designed to have a permanently sticky, reliable bond with high coverage and a long bonding range. This classic adhesive allows for quick installation of a wide range of commonplace flooring, including vinyl flooring and various flooring tiles.
Non-Toxic, Non-Flammable
We designed 3M™ Fastbond™ Pressure Sensitive Adhesive 422NF Blue to create a reliable bond for your flooring application, large or small. As a heat resistant adhesive, it is non-flammable in the wet state. When placed alongside commonplace solvents, this adhesive has a comparatively low odor.
Recommended Applications
- Bonding flooring materials
- Carpet tile installation
A Low-Odor Alternative for Flooring
It is ideal for sensitive environments, such as schools, hospitals and office buildings, carpet and vinyl floor tiles are an economical and convenient flooring option for areas with high foot traffic. When it comes to installing single or multiple tiles, 3M™ Fastbond™ Pressure Sensitive Adhesive 4224NF Blue provides a solid bond with excellent water, UV and plasticizer resistance. Users can also choose their preferred method of application – roll, spray, trowel or brush – to meet their needs.
Applying Your Adhesive
Whether it is being sprayed, brushed or rolled on, the application of your 3M™ adhesive is a straightforward process. Start by carefully applying your adhesive to your surface until you’ve formed a uniform coat. Using an overlapping pattern, the application of one coat should prove sufficient for most surfaces. Effective adhesive coverage is accomplished when 80% or more of the surface is covered. Some substrates, including porous materials, may require an additional coat. In order to apply additional adhesive, simply wait until the existing adhesive becomes dry to the touch, and then proceed with the application of the additional coat.
Resources
Reviews
Large Volume Order
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
